User Guide

34
11.3. Protocol
11.3.1. Setfunctie lijst
De PC kan de TV/DS controleren voor specieke acties. Het setfunctiecommando laat u toe de het gedrag
van de TV/DS te controleren van op afstand via de RS232-poort. Het formaat van het setfunctiepakket
bestaat uit 9 bytes.
Setfunctiebeschrijving:
Lengte:
Totale Byte van de boodschap zonder "CR".
TV/DS ID
Identicatie voor elk van TV/DS (01~98; standaard is 01)
Als we alle TV/DS-instellingen willen instellen, gebruikt u de TV/DS-ID "
99
", en het heeft
geen
Reply (Antwoord)
-commando op deze functie.
De TV/DS-ID kan worden ingesteld via het OSD-menu voor elke TV/DS-set.
Commandotype
Identiceer het commandotype,
"s" (0x73h) : Stel het commando in
"+" (0x2Bh) : Geldig commando-antwoord
"-" (0x2Dh) : Ongeldig commando-antwoord
Commando:
Functie commandocode: Een byte ASCII-code.
Waarde[1~3]:
Drie bytes ASCII die de waarde deniëren.
CR
0x0D
Setfunctie formaat
Zend: (Commandotype = "s")
Naam Lengte ID Commandotype Commando Value1 Value2 Value3 CR
Byte-telling 1 Byte 2 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte 1 Byte
Volgorde
van bytes
1 2~3 4 5 6 7 8 9
OPMERKING
: Voor VT2405LED-1 en VT3205LED is het ingestelde commando “Power on” (Inschakelen)
de uitzondering
Antwoord: (Commandotype = "+" of "-")
Naam Lengte ID Commandotype CR
Byte-telling 1 Byte 2 Byte 1 Byte 1 Byte
Volgorde
van bytes
1 2~3 4 5
OPMERKING
:
1. Het antwoord voor het commando "Inschakelen" is de uitzondering voor VT2405LED-1 en VT3205LED.
Het is 0x322B0D ( 2+<CR>).
2. Als de PC het commando toepast op alle displays (ID=99) zal enkel de #1 set moeten antwoorden op de
naam ID=1.
Example1: Stel de helderheid in op 76 voor TV-02 en dit commando is geldig
Zend (Hex-formaat)
Naam Lengte ID Commandotype Commando Value1 Value2 Value3 CR
Hex 0x38
0x30
0x32
0x73 0x24 0x30 0x37 0x36 0x0D
Antwoord (Hex-formaat)
Naam Lengte ID Commandotype CR
Hex 0x34
0x30
0x32
0x2B 0x0D