Product guide

ECM-D70T Ceiling Mount
Ceiling Mount for Dual Flat-Panels up to 46”
ECM-3763D Ceiling Mount
Back-to-Back Ceiling Mount for Flat-Panels up to 350 lbs
ECM-3763Q Ceiling Mount
Quadruple Ceiling Mount for Flat-Panels up to 175 lbs
The ECM-D70T ceiling mount fits dual
flat-panels up to 50” in either portrait
or landscape orientation. It offers
dynamic viewing with 360° swivel and
15° of tilt. The mount’s ultra-thin design
keeps the center of gravity close to the flat-panels for better
balance. Integrated cable management keeps the installation clean and
organized. Optional brackets are available for attaching mini PCs and digital
media players and servers. The ECM-D70T fits a 2” NPT extension pipe.
• Optional brackets for mini PCs and digital media players/servers
• Integrated cable management
• 360° swivel with 2” NPT coupler
• Holds two flat-panel displays up to 46” each in portrait or landscape
orientation
• 15° of tilt facilitates strategic placement of the flat-panel
The ECM-3763D suspends two back-to-
back displays from the ceiling and adapts to
2” NPT. No adapters are required for mount-
ing so installation is fast and easy. Center
support has mounting points for electrical
J-box (not included). Each mounting bracket
can hold a flat-panel up to 175 lbs.
• Suspends from ceiling with 2” NPT pipe
(not included) PP-6 or PP-6A Ceiling adapters
• Mount displays right out of the box - no adapters needed
• Works with optional brackets for mini PCs and digital media player
adapters
• Integrated cable management keeps installation clean and organized
• Center support features mounting points to receive J-box for power or
A/V (not included)
• Supports two flat-panels back-to-back
The ECM-3763Q suspends four flat-panel
displays weighing up to 175 lb each from
the ceiling in a fixed ring. The mount can
be suspended from a 2” NPT pipe and
displays mount right out of the box without
an adapter. Integrated cable management
keeps installation clean and organized.
The ECM-3763Q also works with optional
brackets for mini PCs and digital media player adapters. Mount displays
right out of the box - no adapters needed.
• Total mount weight capacity 700 lbs
• Works with optional brackets for mini PCs and digital media player adapters
• Integrated cable management keeps installation clean and organized
• Includes AST-2446-2 adjustable height ceiling adapter, providing 24-
46” of adjustment in 1.25” increments
• Supports four flat-panels in a fixed ring
SPI-PRO Projector Mount
SpiroLock™ Projector Mount with 1.5”
NPT Coupler
MAG-PRO Universal Mount
Universal Mount with Integrated Coupler for
Projectors up to 25 lbs
FTP Projector Mount Bundle
Fine-Tune Projector Mount with Quick-Locking
Cables and CLS Adapter
The SPI-PRO holds projectors up to 45 lbs
and has an integrated 1.5” NPT coupler.
The SpiroLock
™
torsion-spring on this
projector mount allows quick and
easy installation.
The bottom piece attaches to the
projector, the top piece connects
to the ceiling and then the installer
simply lifts, turns and pushes the
projector into place until the SpiroLock
™
snaps it firmly together. Radial
Glide
™
provides six degrees of omnidirectional pitch.
• Radial Glide
™
allows quick and easy, tool-free projector alignment
• Universal mounting legs reach a large variety of projector mounting
points
• Easy release to staging position allows projector removal with both
hands
• Internal safety device holds projector securely in place during detach-
ment
• Includes ceiling plate and threaded pipe nipple
• Adapts to 1.5” NPT
• Two-piece mount allows separate ceiling and projector installation, then
twists and locks together
The MAG-PRO universal projector mount fits
most projectors that weigh less than 25
lbs. The integrated coupler attaches to
a standard 1.5” NPT and includes a
cable routing port. The pat-
ented MagnaGuide
™
feature
reduces installation time
by using powerful magnets
to easily guide the integrated pipe
coupler to the mount. A safety lever
locks the two pieces together securely.
Radial Glide
™
allows up to 6° of smooth tilt adjustment and a simple lock-
down screw secures the adjustments. Lock-It
™
security hardware is used at
critical mounting points for a safe and secure installation. OSHPD approved
and UL listed.
• Lock-It
™
security hardware and leveling barrel provide strong protection
• Radial Glide
™
provides smooth roll, pitch and yaw
• Easy-to-install two-piece design
• Patented MagnaGuide
™
reduces installation time and aids in projector
alignment (U.S. Patent No. 7,758,001 B2)
• Integrated coupler attaches to standard 1.5” NPT and features cable
routing port
A slide release and the precision adjustments make the FTP universal
fine-tune projector mount a time saver during installation and service calls.
The FTP’s enhanced fine-tune features allow the installer to adjust pitch,
roll and yaw independently and without tools. After aligning the projectors
image to the final projection settings, the FTP can be locked in position with
a single thumb screw.
The FTP-FCTA-QL bundle includes Quick-Locking Cables and CLS adapter.
• Lock-It
™
security hardware and leveling barrel provide strong protection
• Universal mounting legs (four long pre-installed, two short)
• Post-installation leveling barrels
• Mounts to pipe or ceiling structures with included quick installation tool
• Innovative patent-pending mechanism enables smooth finger-tip align-
ment (no tools required)
AM100 Swingout Mount
Low-Prole Ultra-Slim Swingout Mount for
Flat-Panels up to 100 lbs
AM500 Flat Panel Mount
Articulating Mega Wall Mount for Displays
up to 500 lbs
LMV Framing System
Video Wall Framing System for Flat-Panels
up to 160 lbs
The AM100 is a slim mounting wall plate that provides three options for the
swing arm placement, allowing the mount
to swing out from the left, right or center,
based on the installation requirements.
The swing-out arm extends 30” from
the wall and provides 15° of downward
tilt to achieve the desired viewing angle
from virtually anywhere in a room. The
lightweight aluminum mount retracts
smoothly and easily to a very thin 1.46” from the wall. To keep power and
cables protected when pulling or pushing the display, cable management
channels are built into the arm.
• Designed for today’s slimline flat-panels
• Universal mounting pattern up to 630 x 526 mm
• Extends 30” from wall
• 15 degrees of tilt
• Collapses to just 1.5” deep
• Low profile, ultra thin swing-out flat-panel mount
The AM500 is an articulating wall mount for displays up to 500 lbs The
mount holds flat-panel displays up
to 82” The positive and negative tilt
adjustment allows the mount to be
installed level and plumb. The dual
articulating arms allow even the heavi-
est display to be pulled away from the
wall for service or alignment.
The mount features a 90 degree
rotation which allows the display to be installed in landscape, portrait or any
other arbitrary angled orientation. There are three different mounting brack-
ets for different size displays (Only one included with each configuration).
Also refer to AM501 and AM502 for more model specific information.
• 500 lb weight capacity securely holds any heavy weight display
• Positive and negative tilt adjustment for a level installation
• 15” extension from the wall for full display access
• Mounting head provides 90° rotation capability to the left andright
The LMV is a customizable video wall framing system for flat-panels
weighing up to 160 lbs with a mount-
ing pattern of 200 x 200 to 600 x
400mm. It features multi-monitor
stacking, spring-loaded release, open
design, custom spacers, top adjust-
able mounting brackets and straight
scissor-style extension.
• Shared component parts across
product line reduces cost and training time and optimizes labor ef-
ficiency
• Updated latch design and smaller base frame size provide quick and
easy installation
• Laser cut, precision design spacers ensure seamless alignment without
need for time consuming adjustments
• Patent pending, top-adjustable mounting brackets ensure alignment and
levelness of displays
• Scissor design and compact mounting arms allow for extension in one
smooth motion
• Spring-loaded locking mechanism provides quick release
• “Click-It” locking feature confirms display is secure through an audible noise
MOUNTS
PREMIER MOUNTS
60