User guide
Table Of Contents
- Safety Precautions
- Package Contents
- Parts Name and Functions
- Setup Procedure
- How to Mount and Attach Options to the LCD Monitor
- Connections
- Basic Operation
- OSD (On-Screen-Display) Controls
- Controlling the LCD monitor via RS- 232C Remote Control
- Appendix: Installing stands
- Features
- Troubleshooting
- No picture
- The Power button does not respond
- Image persistence
- Image is unstable, unfocused or swimming is apparent
- Image of component signal is greenish
- The LED on monitor is not lit (no green or red color can be seen)
- Display image is not sized properly
- No Sound
- Remote Control is not available
- Stripe Noise
- Specifications
- Customer Support
- Limited Warranty
- Mexico Limited Warranty
ViewSonic CD4232 35
Appendix: Installing stands
How to install stands
1. Spread the protective sheet on the flat
surface, such as a desk. Place monitor
on the protective sheet.
2. Place the stands on the monitor as
shown.
NOTE:
Install the stands so that their longer
portions come to the front.
3. Use the M4 and M6 screws and a
suitable screwdriver to secure the
stands on the LCD monitor.
M6 screw
hole
M4 screw
holes