User guide
Table Of Contents
- Safety Precautions
- Package Contents
- Parts Name and Functions
- Setup Procedure
- How to Mount and Attach Options to the LCD Monitor
- Connections
- Basic Operation
- OSD (On-Screen-Display) Controls
- Controlling the LCD monitor via RS- 232C Remote Control
- Appendix: Installing stands
- Features
- Troubleshooting
- No picture
- The Power button does not respond
- Image persistence
- Image is unstable, unfocused or swimming is apparent
- Image of component signal is greenish
- The LED on monitor is not lit (no green or red color can be seen)
- Display image is not sized properly
- No Sound
- Remote Control is not available
- Stripe Noise
- Specifications
- Customer Support
- Limited Warranty
- Mexico Limited Warranty
ViewSonic CD4232 26
Sound
Volume
• Adjusts the audio volume.
• Press button to increase volume, or button to decrease volume.
Mute
• Turns audio off temporarily.
• Press ENTER, and then or button to turn this function on or off.
Audio Source
• Selects the audio input source. You can use this function to select an audio input source from Audio 1
(from the AUDIO-IN R/L CH1 jacks), Audio 2 (from the AUDIO-IN R/L CH2 jacks), Line-in (from the
LINE-IN jack) or HDMI (from the HDMI jack, only available when HDMI signal is detected).
• Press ENTER, and then or button to change selection.
Volume 8
Mute OFF
Audio Source Audio 1
Sound
:Move
:Enter
:Exit
Enter
Exit
Audio 1
Audio 2
Line-in
HDMI