User guide
Table Of Contents
- Safety Precautions
- Package Contents
- Parts Name and Functions
- Setup Procedure
- How to Mount and Attach Options to the LCD Monitor
- Connections
- Basic Operation
- OSD (On-Screen-Display) Controls
- Controlling the LCD monitor via RS- 232C Remote Control
- Appendix: Installing stands
- Features
- Troubleshooting
- No picture
- The Power button does not respond
- Image persistence
- Image is unstable, unfocused or swimming is apparent
- Image of component signal is greenish
- The LED on monitor is not lit (no green or red color can be seen)
- Display image is not sized properly
- No Sound
- Remote Control is not available
- Stripe Noise
- Specifications
- Customer Support
- Limited Warranty
- Mexico Limited Warranty
ViewSonic CD4232 21
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can
be powered on or off using the following two options:
Power Indicator
Using Power Management
The LCD monitor follows the VESA approved DPM Power Management function.
The power management function is an energy saving function that automatically reduces the power
consumption of the monitor when the keyboard or the mouse has not been used for a fixed period.
The power management feature on your new monitor has been set to the ”ON” mode. This allows your
monitor to enter a Power Saving Mode when no signal is applied. This could potentially increase the life
and decrease the power consumption of the monitor.
1. Pressing the power button.
NOTE:
Before pressing the power button, be
sure to connect the supplied power cord
to the LCD monitor.
2. Using the remote control.
NOTE:
Before operating the remote control, be
sure to connect the supplied power cord
to the LCD monitor.
Status Color
Power ON Green
Power OFF Red
Power Standby Flashing red