ViewSonic ® 3DPF8 3D Digital Photo Frame - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell’utente - Guia do usuário - Kullanιcι kιlavuzu - Gebruikshandleiding - Pyководство пользователя - 使用手冊 (繁體) - 使用手册 (简体) - 사용자 안내서 - ユーザーガイド - ﺍﻠﻤﺴﺘﺨﺪﻢ ﺪﻠﻴﻞ Model No.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. 7. o not block any ventilation openings. Install the unit in accordance with the manufacturer’s D instructions. 8.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Copyright Information Copyright © ViewSonic® Corporation, 2010. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Table of Contents Introduction...................................................................... 1 Features................................................................................................ 1 Package Contents................................................................................. 2 Remote Control..................................................................................... 2 Getting Started.................................................................
Introduction Features ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● Bright 8” (4:3) high-resolution color 3D TFT LCD panel Easy to transfer 2D photo and video into to 3D automatically Compatible with ViewSonic 3DV5 3D camcorder and 3DSC5 3D camera Auto slideshow with your personal MP3 music in the background Quickly play video file of MPEG 4 format Built-in battery for portable usage Compatible with USB flash drive and SD/SDHC/MMC Built-in speaker for music playback Direct USB connection to your PC for easy file tra
Package Contents Please check that the package contains the following items: Picture frame CD Power Adapter Remote control Quick Start Guide USB Cable In case the package content is not complete, please contact your dealer immediately. Remote Control Press Power button on the remote control pointing at the remote control sensor of this unit.
Getting Started Picture Frame Overview Navigation button Volume Button OK/Play/Pause button Return Button Menu Button IR receiver Power On/Off SD Card Slot USB Connector LED DC-In Speaker Reset DC power jack/USB connector for PC Stand ViewSonic 3 3DPF8
General Use Base Installation In the Photo Frame back, pull the stand out of the slot. After a “stuck” sound, lift the stand by turning 45°. Then the installation is complete. Operation Before you can use the picture frame, it has to be connected to the power supply. Plug the connection cable of the power adapter into the respective plug of the picture frame and plug the power adapter into a wall outlet .
Operations and Functions Main Menu When you power on the 3D Digital Photo Frame, you will see the Main Menu appearing on the screen, which allows you to quick access the PHOTO, VIDEO, MUSIC, TIME/DATE, STORAGE, and SETUP functions. This chapter will guide you through how to use these functions of the device. Photo Mode 1. 2. 3. 4. 5. On the Main Menu, select the PHOTO item and press OK to enter the Thumbnail Mode. You can browse the thumbnails of all photos.
PHOTO MENU PHOTO MENU allows you to configure the settings while viewing pictures, such as slide show speed, picture mode, background music playback, etc. See the next section for detailed information on configuring the settings. Configuring the Photo View Settings On the Photo List screen, press Menu button to enter the Photo MENU.
Video Mode 1. 2. 3. 4. On the Main Menu, select the VIDEO item and press OK to display the Video List. You can browse the list of all video files. Use the Navigation buttons to navigate through the video files. Press OK to start playing the video in full screen mode. Simply press Return button to stop the video playback. Then you can select next video to play. Video List Configuring the Video Playback On the Video List screen, press Menu to enter the VIDEO MENU.
Music Mode 1. 2. 3. 4. On the Main Menu, select the MUSIC item and press OK to display the Music List. You can browse the list of all music files. Use the Navigation buttons to navigate through the music files. Press OK to start playing the music. To stop the music playback and return to Music List, simply press Return. Then you can select next music to play. Music List Configuring the Music Playback On the Music List screen, press Menu to enter the MUSIC MENU.
Time/Date mode On the Main Menu, select the TIME/DATE item and press OK to set the date and time for the system. In addition, you can set up to four alarms for the system. Setting Description Time Use the Navigation buttons UP / Down to set the correct time settings. Date Select the date format (M/D/Y, Y/M/D, or D/M/Y. M: month, D: day, Y: year) and then use the Navigation buttons UP / Down / Left / Right to set the correct date settings.
Storage mode On the Main Menu, select the STORAGE item and press OK to select the storage media: SD/SDHC/MMC card, USB device, or Internal memory. Setting Description SD/MMC Select the inserted SD/MMC card as the storage media. USB Select the connected USB device as the storage media. Internal Memory Select the internal memory as the storage media. SETUP MENU On the Main Menu, select the SETUP item and press OK to customize your 3D Digital Photo Frame.
Connecting Connecting to PC For copying data into the internal memory, you can connect the 3D Digital Photo Frame via the USB connection directly with the PC. Use the supplied USB cable and your PC, then turn it on by pressing POWER button at the side. Now, all necessary system drivers are installed and after a few seconds, a popup window will appear and display that the device can be used as the data storage.
Specifications Item Panel Description Panel size: 8” Panel resolution: 800 x 600 3D display format Photo: Support original 3D photo side by side format (*.JPG) Video: Support original 3D video “side by side” clip with *.MP4 (MPEG H.264) Max. Video Resolution: up to 720P/30fps. Photo Photo format: JPEG Max. resolution: 16 Megapixel Auto slide show: Yes Video Video format: *.MP4 (H.264) Clip: Up to 720P/30fps *.MP4 (H.
Troubleshooting Problem Cause Solution Power indicator is not lit. Power is off or power indicator is broken. Check whether the AC adapter is well connected and power supply is normal. No start-up interface. AC adapter is not well connected or does not power on normally. Check whether the AC adapter is well connected and make sure the photo frame is powered on normally. Can see start-up clock, but could not play (when a card or USB drive is present).
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Website T = Telephone F = FAX Email www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 service.ca@viewsonic.com F= 1-909-468-3757 Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm Hong Kong www.hk.viewsonic.
Limited Warranty ViewSonic® Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
