3D Snap – 3DSC5 3D Digital Camera User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Extra notice regarding 3D viewing: 1. To view 3D display and receive 3D effects well, the viewer should be positioned to face the center of the screen at around 30 cm (12 in) distance and not having a steep viewing angle. 2. Viewing in 3D mode may cause dizziness or even perceptive after effects, disorientation, and eye strain. It is recommended that viewers take frequent breaks to alleviate the likelihood of these effects.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. 7. o not block any ventilation openings. Install the unit in accordance with the manufacturer’s D instructions. 8.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration 0.1% < 0.
Copyright Information Copyright © ViewSonic® Corporation, 2011. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Getting Started Product overview 1. 2. 3. 4. 5. 6. 7. Shutter button Power button Microphone Left lens - for 3D capture Flash Self-timer indicator Right lens - for 2D and 3D capture 8. Speaker 9. Battery cover 10. Record button 11. Power indicator 12. 2D/3D switch button 13. 2D/3D LCD monitor 14. 5-way joystick 15. Playback button 16. Delete button 17. Mini USB/HDMI port cover 18. Strap mount 19.
Loading the battery/ Using a memory card SD /SD HC 1. Pull the battery cover, then it will open automatically. 2. Place the battery into the compartment. Align the + and - metallic ends carefully. Note that the + and - metallic contacts must be aligned with the corresponding contacts in the compartment. Once you open the battery cover, the power of camera will be cut off. 3. Insert a SD/SDHC card (sold separately) into the slot until it clicks into place.
Powering On or Off 1. Power on: Press the POWER button to turn on the camera, and the power indicator lights green. 2. Power off: Press and hold the POWER button until the power indicator is extinguished. If the unit cannot be powered on, please check the followings: 1) The battery is correctly loaded; 2) The loaded battery has enough power. Please make sure the camera is powered off before you open the battery cover, for the battery will eject automatically. Setting Language 1.
Basic Operations Press this button ( ) to switch 2D/3D mode. Also, the image showing on the LCD screen will become 2D/3D. Pressing this button in playback can change the 2D or 3D files store in your camera or memory card. Please note that 3D files cannot be recorded/viewed/deleted in 2D mode, and vice versa. The 2D/3D files are stored separately. When recording or shooting in 2D mode, only the right lens is activated. This product utilizes the “Parallax Barrier” 3D technology.
Playback File type 2: : video File type 1: : picture : 2D file : 3D file Current file/Total files 0001/0010 Battery life Storage: Highlight frame : internal : memory card Press OK to display in full screen 1. Press the Playback button ( Press the 2D/3D button ( Press Shutter to return to previous screen ) to enter playback preview mode. ) to switch between 2D or 3D files. 2. Use the Joystick to navigate through your recordings and select a file. Press to view the file in full screen.
Deleting files Press Playback button ( ) to enter playback mode and use the Joystick to select the file which you want to delete. Press the Delete button ( Option ) and there are 3 available options: Description Yes Delete the selected file No Exit menu without deleting the file All Delete all video and image files in the same folder (3D or 2D) Once the file is deleted, it cannot be recovered. Menu operations 1. Push the Joystick to the right ( ) to bring up menu. 2.
Menu files Item Resolution Flash Strobe Night Mode EV Option 3MP 3 mega-pixels 5MP 5 mega-pixels 12MP 12 mega-pixels Off Auto On Self-timer Continuous Shot The flash is disabled. The flash enables when ambient light is insufficient. The flash is forced on in every shot. Auto Turn on the night mode. Off Turn off the night mode. -2 ~ +2 Auto White Balance Description Manually adjust the exposure to gain better effect when the preview image appears too bright or too dark.
Item Language Option 15 Select the language for the camera. languages To setup the date and time, push the Joystick up/ down ( ) to adjust value; left/right ( ) to shift fields. Press OK to save the changes. Date & Time Date Stamp Slide Show On Print a date and time mark on each photo (photo only). Off Turn off the Date Stamp function. Off Turn off the Slide Show function in playback mode. All Turn on the Slide Show function in playback mode.
* Flicker table: Region England Germany France Italy Spain Netherlands Russia Setting 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz Region Portugal America Taiwan China Japan Korea Thailand Setting 50Hz 60Hz 60Hz 50Hz 50/60Hz 60Hz 50Hz Note: The flicker setting is based on the frequency standard of your local power supply.
File management on PC Connect the USB port of the camera to your PC/Notebook by USB to mini-USB cable. Power on the camera and the power indicator lights green. The camera will turn to a removable disk on the PC, then you can read all files stored in the camera. Copy your normal 2D files into the 2D (DCIM\101DIR2D) folder in your memory card. Do not store 2D files in the 3D (DCIM\100DIR3D) folder, otherwise they will not be detected and displayed. Connecting to HDTV 1. Turn on your HDTV. 2.
Appendix Battery life / Capacity table Battery Life Table Still picture (without flash) Video clip Number of shots Recording time (minute) 2500 45 * The unit is set to 3D mode. Note: This table is for your reference only. The actual battery life depends on your battery quality and recharge level. Battery Life Table Memory (SD/SDHC) Video clip (720p) (min.
Troubleshooting Problem Possible cause Solution I output 3D video/ photo playback to my home HDTV. But the 3D effect does not work. Your TV/display is 2D and therefore does not support the format of the 3D files. Covert the 3D video/photo into red/ cyan format. Then play and output the converted file on your 2D HDTV/display. You also need to wear the accessory red/cyan glasses. I output 3D video/ photo playback to my home 3D HDTV. But the 3D effect does not work.
Specifications Image Sensor 5 Mega-pixels CMOS (2592 x 1944) Resolution Camera: 3M, 5M, 12M Camcorder: HD 720p 30f (1280 x 720) File Format JPEG, MP4 (H.264) 3D content format: Side by Side Video Frame Rate Up to 30 frames per second Internal Memory N/A External Memory SD card slot (Up to 32GB SDHC) 3D/2D capture Yes, switchable LCD Display 2.4” 3D TFT supports 3D and 2D mode display Lens Fixed focus lens x 2 Focus Range 1m~∞ Aperture Range F2.8 Shutter Speed 1 ~ 1/2000 sec.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 service.ca@viewsonic.com F= 1-909-468-3757 Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty ViewSonic® 3D Digital Camera What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
Mexico Limited Warranty ViewSonic® 3D Digital Camera What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.
