VSD241 Smart Display User Guide Model No.
Compliance Information Please read before proceeding • Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized accessories may void your warranty. • Do not store your device in temperatures higher than 50°C (122°F). • The operating temperature for this device is from 0°C (32°F) to 35°C (95°F). FCC Notice The following statement applies to all products that have received FCC approval.
Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
ENERGY STAR This ENERGY STAR qualified product saves your money by reducing energy cost and protecting the environment without sacrificing features or performance. We are proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR? Products that are ENERGY STAR qualified use less energy and prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr6+) Polybrominated bipheny
Important Safety Instructions 1. DO NOT place objects on top of the device, as objects may scratch the screen. 2. DO NOT expose the device to dirty or dusty environments. 3. DO NOT place the device on an uneven or unstable surface. 4. DO NOT insert any foreign objects into the device. 5. DO NOT expose the device to strong magnetic or electrical field. 6. DO NOT expose the device to direct sunlight as it can damage the LCD Screen. Keep it away from heat sources. 7.
Copyright Information Copyright © ViewSonic® Corporation, 2013. All rights reserved. Android™ is a trademark of Google Inc. Use of this trademark is subject to Google Permissions. This product has an Android™ platform based on Linux, which can be expanded by a variety of JME-based application SW. All products used in this device and trademarks mentioned herein are trademarks or registered trademarks of their respective owners.
Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: VSD241 ViewSonic Smart Display VS15197 VSD241_UG_ENG Rev.
Table of Contents Table of Contents 1 VSD241 Smart Display Features 1.1 Installing wall mount bracket............................................... 4 2 Set Up Your VSD241 Smart Display 2.1 Connection.......................................................................... 5 2.2 Get Your Smart Display Ready for Use............................... 5 2.3 Power on Your Device......................................................... 6 2.3.1 Wake on LAN (WOL) Function.............................. 7 2.
Table of Contents 4.4 Managing Your Device Settings........................................ 21 4.4.1 Check storage spaces.......................................... 21 4.4.2 Remove the SD card safely.................................. 22 4.4.3 Erase all data from your device............................ 22 4.5 Connecting to HDMI-compliant Devices via HDMI Input... 23 4.6 Bluetooth Connection........................................................ 24 4.6.1 Turn on Bluetooth and make the device discoverable....
Table of Contents 7.3 Protect Your Device Data with a PIN................................. 39 7.3.1 Disable or change PIN.......................................... 39 7.4 Protect Your Device Data with a Password....................... 40 7.4.1 Disable or change the password.......................... 40 7.5 Protect Your Device Data with Face Unlock........................ 41 7.6 Power Saving Feature....................................................... 42 7.7 Power Management Information...................
VSD241 Smart Display Features VSD241 is a Smart Display with 24-inch quad-core display running on Android 4.2.1 Jelly Bean. Comes with 1920x1080p HD multi-touch resolution, allow you to work with HDMI via MHL, full-sized USB, Bluetooth connectivity as well. 1 VSD241 Smart Display Features This section introduces you to the features of your Smart Display. NOTE • The features or applications described in this User’s manual may vary depended on the device model purchased. Front View 1 2 3 4 5 6 7 8 No.
VSD241 Smart Display Features No. Components 3 Touch Screen 4 5 6 7 8 Descriptions Touch the screen to control the on-screen configurations including menu items, applications, buttons, keyboard and so on. OSD Menu / Exit Touch this button to launch the OSD configuration menu and touch again to exit. Power button Touch to power on / lock the smart display. (LED indicator) - Touch about 0.5 seconds to power on the power (LED in blue) - Lock the smart display when the display is on (LED turns into orange).
VSD241 Smart Display Features Back View 4 5 6 7 8 1 2 No. Components 1 DC in Port 2 HDMI 3 RJ45 Connector USB Ports x 2 3 Descriptions Connect to power adaptor. Connect to digital high quality device for video and audio configurations (e.g. DVD Player, BD Player VPG or Notebook). Connect to a RJ45 cable for network connection. 7 Used for keyboard, mouse, flash disk ( supports FAT32 format only) or printer connections.
VSD241 Smart Display Features 1.1 Installing wall mount bracket The VSD241 supports wall mount bracket installation. We recommend using mounting interface that comply with Video Electronics Standards Association (VESA) standard. Please follow the steps to install your bracket: 1 2 3 4 Turn off your monitor and unplug its power cord. Lay the monitor face-down on a flat surface. Take care to protect the screen. Remove the screws for wall mount and then remove the cover plate.
Set Up Your VSD241 Smart Display 2 Set Up Your VSD241 Smart Display 2.1 Connection Keyboard Printer USB Mouse USB Storage USB Mini USB Micro USB SD External Computer Earphone SD card LAN HDMI Power Earphone Outlet DVD Player Bluetooth Devices Wi-Fi Devices Notebook 2.2 Get Your Smart Display Ready for Use Insert the SD card 1 2 Open the compartment cover on the back of the smart display. Insert a SD card if desired and / or available on the back of your smart display.
Set Up Your VSD241 Smart Display Connect the Power Cord 1 2 Connect the included power cord to the power jack. Connect the other end of the power cord to a suitable power outlet. 2.3 Power on Your Device Touch the power button gently to power on your device Slide the lock icon to unlock the screen (if the lock screen function with slide is enabled) 1 After connecting the power cord, you can touch the power button about 0.5 seconds on the bottom of front panel to power on your device.
Set Up Your VSD241 Smart Display 2.3.1 Wake on LAN (WOL) Function To Enable the Wake on LAN (WOL) Function: • Touch Settings icon on the screen. • Check Ethernet is ON. • Choose More… under Data usage row. • Enable Wakeup on Lan on the right-hand side of screen. 2.4 Power Off Your Device 1 2 Touch and hold the power button for about 3 seconds. When the power off menu appears, touch OK.
About Your VSD241 Smart Display 3 About Your VSD241 Smart Display 3.1 Touch Screen The main way to control the device is using your finger to touch the sensitive surface of the screen directly. You can manipulate icons, buttons, menu items, on-screen keyboard and other items on the touch screen with below methods: Methods Touch Touch and Hold Drag Swipe or Slide Zoom Out Zoom In Descriptions Simply touch the items with you finger. - Act on items on the screen including application and settings icons.
About Your VSD241 Smart Display 3.2 Applications, Widgets and Shortcuts The soft buttons or icons offer a variety of functions and shortcuts. On the Home screen, it is your starting point to access all the features on your device. It displays application icons, widgets, shortcuts and so on. Applications: Software allows you to perform a specific task. Power on your device, it is preloaded with a variety of applications already. You can also download additional applications from the Google Play Store.
About Your VSD241 Smart Display No. Items Descriptions Google Search Navigation Area Use the Google Search application to search the web faster and easier from Google. 3 Back Return to the previous screen or option. 4 Home 5 Recent Applications 6 Screehshot 7 Apps 8 Bluetooth 1 Google 2 9 4:39 Time 10 Voice Input 11 Shortcuts Flick and drag the screen horizontally until the desired Home screen is displayed.
About Your VSD241 Smart Display 3.4 Navigation buttons On the bottom of the screen (system bar), you can find the navigation buttons described as below: Buttons Descriptions Back - Touch this button to go back to the previous screen or option. - If the on-screen keyboard is displayed, the button changes to . Touch it to close the on-screen keyboard. Home - Touch this button to go to the central Home screen when viewing other Home screens.
About Your VSD241 Smart Display Items Time Descriptions Displays the current time. Specified Icon Show you the enabled icon just like enabled Bluetooth. Status Menu Show you the current state of your device just like Owner, Brightness, Settings, WIFI, Auto Rotate, Battery Charging Status, Airplane Mode and Bluetooth Settings. 3.5.1 Managing Status Menu You can touch and drag down the Time area on the status bar to appear the status menu. • Touch OWNER item to view contact people saved on your system.
About Your VSD241 Smart Display 3.6.2 Move an Item • On the Home screen, touch and hold the item that you want to move. • Move the item to the specified position. • Then release your finger to add the item to the new position. 3.6.3 Delete an Item • On the Home screen, touch and hold the item that you want to delete such as a widget or shortcut. • An “X” will soon be displayed at the top of the Home screen. • Drag the item over the “X”. • Then release your finger to delete the item. 3.6.
About Your VSD241 Smart Display 3.7 Navigating the Applications You can find applications available on your device in the all Apps menu: 3.7.1 Apps screen Open the Apps screen You can access Apps screen from any Home screen by touching the Apps button located on the bottom of your screen. The Apps screen contains all of the applications installed on the device including those you have downloaded. Navigate pages of applications Flick the Apps screen horizontally and touch an application to launch it.
About Your VSD241 Smart Display Use the shortcut to open an application 1 2 Touch the Home button on the system bar. If the desired application shortcut displays on the Home screen, touch the shortcut to launch the application. 3.7.3 Recent Applications Open a recently used application 1 Touch the Recent Applications button to view the recently used applications. 2 Scroll the list of recently used applications, and touch the desired application thumbnail to launch the application.
Using Your VSD241 Smart Display 4 Using Your VSD241 Smart Display 4.1 Managing Contacts Touch Home button│Apps button│People to view and manage your contacts. 4.1.1 Add a new contact 1 2 Touch New. Select the account where you want to add this contact, such as your Gmail account. • This area shows the account in which the new contact is stored. • Take photo: Touch to take a photo to use as the contact’s visual caller ID.
Using Your VSD241 Smart Display 4.1.2 Find a contact 1 2 To locate a contact, you can either: • Flick the All tab contacts list on the upper left of screen until you find the contact. Or, drag the scroll bar on the left of the screen to scroll through the contacts list. • Touch Find contacts on the upper right of screen, and then type either the contact’s full name or only the first letters of it into the text box. The screen displays the matching contacts.
Using Your VSD241 Smart Display Share a contact 1 2 3 4 On the contacts list, find a desired contact. Touch the contact entry to view the contact details. Touch the Menu button on the upper right of screen, then select Share contact. From the Share contact via menu that appears, select the way you want to share the contact information with your friends, such as through Bluetooth or Gmail. NOTE • Upcoming Gmail App for Android 4.2 brings pinch-to-zoom and swipe to delete.
Using Your VSD241 Smart Display 4 From the Join contacts list, touch another contact to link, and then touch Done. The joined contact’s information is displayed with the original Contacts settings. In People, touch the Menu button on the device or the Menu button on the screen. Settings Accounts NOTE: If you want to synchronize individual data manually, clear Autosync, and then from your account, touch a data item to start synchronization of that data.
Using Your VSD241 Smart Display Select an option or item on the pop-up menu 1 Touch the Menu button on the device or the Menu button on the screen to open the pop-up menu. 2 Touch the desired item on the pop-up menu. 4.3 Google Search You can use the Google Search widget to find websites and information on Google, applications installed on your device, contacts stored in your Contacts list and sourced from Gmail log in. For Android 4.
Using Your VSD241 Smart Display Search by voice 1 2 3 Touch the microphone that appears beside the search box. Say the name or keyword of the item you want to search. The browser with matching web links opens. 4.4 Managing Your Device Settings 4.4.1 Check storage spaces Touch the Home button │ Apps button │ Settings │ Storage. The screen displays the total and available space on the device, USB storage and SD card.
Using Your VSD241 Smart Display 4.4.2 Remove the SD card safely 1 2 3 4 Touch the Home button │ Apps button │ Settings │ Storage. Touch Unmount SD card under the SD Card section. Press and hold the Power button until the Power off menu appears. Then, touch OK to turn off the device. Pull out the compartment cover and then remove the SD card from your device. NOTE • Removing the SD card while the device is working may cause data loss or result in application errors.
Using Your VSD241 Smart Display NOTE • Ensure that you have back up all the required data before erasing all data from your device. 4.5 Connecting to HDMI-compliant Devices via HDMI Input HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed digital audio/video data. You can obtain the best user experience for video playback and gaming via HDMI. VSD241 is equipped with a HDMI input for connection to an external HDMIcompliant device.
Using Your VSD241 Smart Display 4.6 Bluetooth Connection Bluetooth is a short-range wireless communications technology that allows your device to connect to other Bluetooth-enabled devices over a wireless network. Bluetooth on your device operates in three different modes: Status On Discoverable Off Descriptions Bluetooth is turned on. Your device is enabled to detect Bluetooth devices within range, but will not be found by them. Bluetooth is turned on, and other Bluetooth devices can detect your device.
Using Your VSD241 Smart Display 5 6 You may be prompted to enter a password to authenticate. Enter the same password on both devices, or enter the password provided by the device manufacturer. Ensure that you read the documentation of the pairing device to check if it requires a default password. When the pairing is successful, paired but not connected devices are displayed under the “PAIRED DEVICE”. NOTE 1. The message indicating successful pairing may vary depending on the type of the paired device. 2.
Internet 5 Internet 5.1 Connecting to the Internet To browse the web and access web-based utilities such as instant messaging, you can connect VSD241 to a LAN network via RJ45 cable on LAN connector or set up a Wi-Fi connection. 5.1.1 Wi-Fi connection 1 2 Touch the Home button │ Apps button │Settings │ Wi-Fi to enable WiFi function by touching “ON”. The device scans for available wireless networks. Touch Wi-Fi settings.
Internet 5.1.2 Check the current Wi-Fi network connection From the status area of the system bar: When your device is connected to a wireless network, the Wi-Fi icon in the status area of the system bar indicates the signal strength (number of bands that light up). If Settings│Wi-Fi│ Network notification is enabled, the “?” icon appears in the notifications area of the system bar, as the device discovers an accessible Wi-Fi network within range.
Internet 5.2 Synchronizing Your Google Data Through a web connection, your device can synchronize your Google data including Gmail, calendar, and contacts with your computer or any other device that you use to access your Google account. Select the applications to synchronize 1 2 3 Touch the Home button │ Apps button │ Settings │ ACCOUNTS In the ACCOUNTS section, tap the icon to check the box to enable all the sync options.
Internet How to begin 1 2 3 Authenticate your Google account You can do this by opening up Google Talk and then signing in to your Google Account. Before using video chat, you must first sign in to your Google Account. Invite the person Open Google Talk application. Locate to the person in your Google Talk friend list who you want to invite to the video chat. Make sure that the friend who you want to chat with is online. Then tap the video in the right of your friend’s name.
Customizing Your VSD241 Smart Display 6 Customizing Your VSD241 Smart Display You can customize your device using the options available in the Settings application. 6.1 Display Settings Change the display settings: 1 2 3 Touch the Home button │ Apps button │ Settings │ Display. You can configure the Wallpaper, Sleep, Daydream and Font size here. For Wallpaper, you can also touch and area on the Home screen to open the Wallpaper configuration screen.
Customizing Your VSD241 Smart Display 6.2 Sound and Ringtone Settings Change the sound and ringtone settings: 1 2 3 Touch the Home button │ Apps button │ Settings │ Sound. Select the list to locate and touch a desired option. To enable a setting, touch the setting option to select the checkbox; to disable a setting, touch the setting option to clear the check box. 6.2.1 System settings Items Touch Sounds Screen lock sound Descriptions Select this item check box to enable the touch sounds.
Customizing Your VSD241 Smart Display 6.2.3 ViewSound enhancement Items ViewSound enhancement Descriptions 1. Set mode with ViewSound effect. 2. Select Pop / Theater / Game / Jazz / Classical or Disable ViewSound effect. 6.3 Date, Time, and Time Zone New function added: 1 The clock has been totally redesigned with an all new look which includes both a digital and analog clock style. You can also resize the digital clock widget to display the time in other cities around the world.
Customizing Your VSD241 Smart Display Items Automatic date & time Set date Set time Descriptions Use network-provide time zone automatically. 1. Touch Set date item to adjust the day, month, and year; you can also touch the day, month, or year to flick to the desired value. 2. Touch Done to confirm the date. 1. Touch Set time item to adjust the hour and minute; you can also touch the hour or minute to flick to the desired value. 2. Touch the AM/PM field if the 12-hour format is in use. 3.
Customizing Your VSD241 Smart Display Set the Keyboard & Input: 1 Touch the Home button │ Apps button │ Settings │Language & input │ Keyboard & input methods. 2 To enable a setting, touch the setting option to select the check box; to disable a setting, touch the setting option to clear the check box. 3 You can also touch setting icon for each selection for advanced configurations. NOTE • Here you can also configure the speech of voice, test output and pointer. 6.
Customizing Your VSD241 Smart Display 6.5.1 Adjustment Bars Contrast/Brightness: Contrast: Touch and drag the slider on the Contrast bar to adjust the contrast of screen display. Drag the slider to the right, the contrast is larger. By default, the contrast is set to 70. Brightness: Touch and drag the slider on the Brightness bar to adjust the brightness of your screen. Drag the slider to the right, the screen is brighter. By default, the brightness is set to 80.
Customizing Your VSD241 Smart Display 6.5.3 OSD Notice idling: The OSD menu will close and go back to the original processing screen automatically during your OSD menu is idling that reached to the OSD time out value. No signal: • The connection for your HDMI is not ready. • The connection between HDMI device and your smart display is not normalization.
Protecting Your VSD241 Smart Display 7 Protecting Your VSD241 Smart Display 7.1 Protect Your Device Data with a Screen Unlock Pattern You can protect your device data against unauthorized access by locking the touch screen with a screen unlock pattern. Once the unlock pattern is enabled and the screen is locked, you need to draw the correct unlock pattern to unlock the screen.
Protecting Your VSD241 Smart Display 7.1.1 Create a screen unlock pattern 1 2 3 4 Touch the Home button │ Apps button │ Settings │ Security. Touch Screen Lock section → Pattern. Read the instructions on the screen and study the animated example of how to draw a pattern. Then, touch Next when you are ready to draw your own pattern. Drag your finger to draw the unlock pattern by connecting at least four dots in a vertical, horizontal and/or diagonal direction.
Protecting Your VSD241 Smart Display 7.2 Disable the screen unlock security 1 2 Touch the Home button │ Apps button │ Settings │ Security. Select None to disable screen unlock security. 7.3 Protect Your Device Data with a PIN 1 2 3 4 5 6 Touch the Home button │ Apps button │ Settings │ Security. Touch Screen Lock section → PIN. On the Choose your PIN screen appears, enter a PIN in the textbox. Your PIN must be 4 characters at least. Touch Continue to proceed. Enter the PIN again to confirm. Touch OK.
Protecting Your VSD241 Smart Display 7.4 Protect Your Device Data with a Password 1 2 3 4 5 6 Touch the Home button │ Apps button │ Settings │ Security. Touch Screen Lock section → Password. On the Choose your password screen appears, enter a password in the text box. A valid password consists of at least 4 characters and contains at least one letter. Touch Continue to proceed. Enter the password again to confirm. Touch OK. 7.4.
Protecting Your VSD241 Smart Display 7.5 Protect Your Device Data with Face Unlock From Android 4.0 Ice Cream Sandwich, Google had been introduced a new way to unlock your devices via front camera. The facial recognition unlock feature called Face Unlock will be an integral part of Android OS. Follow the steps to get the Face Unlock feature set up on your device: 1 2 3 4 5 6 7 Touch the Home button │ Apps button │ Settings │ Security. Touch Screen Lock section → Face Unlock.
Protecting Your VSD241 Smart Display 7.6 Power Saving Feature In order to save energy, this device supports power saving mode (sleeping mode). The device will enter power saving mode when you idle without processing. Then, the screen will go off. You can set the duration of screen to remain on before entering sleeping mode, touch the Home button │ Apps button │ Settings │ Display │ Sleep. 7.7 Power Management Information Please turn of the device when it will not be used for long time.
Troubleshooting 8 Troubleshooting 8.1 Touch Screen Problems Problems Touch screen does not respond to hand gestures or render them properly. Causes Dust, particles or any foreign material on the camera’s or reflector’s surface may affect image quality and the display’s touch function. Solutions 1. Remove any dust or particles from the reflector and camera using compressed air. 2. Gently clean the cameras and reflector surface carefully with a soft antistatic brush to avoid scratches. 3.
Troubleshooting 8.3 Other Problems Problems No power No display Lock-up App doesn't function No network No audio Solutions Touch the LED power light for at least 1-2 seconds, if the LED does not light blue with the device booting-up then: - Ensure that the power adaptor is plugged-in to a suitable power socket - Ensure that the DC connector is fully inserted into the correct socket on the rear of the VSD241 located under the cover - Check the power socket with another device (i.e.
Appendix 9 Appendix Specification LCD Spec. Size Resolution Brightness Backlight Thickness Touch screen Hardware Buttons 61cm (23.8”) 1920x1080 250 cd/m2 LED 11.2 mm Optical touch type, with glass Physical Power button *1 Control keys *4 Blue (on) / Orange (saving) HDMI *1 USB type A *2, mini *1, micro *1 (OTG) 3.5mm Headphone-out *1 LAN (RJ45, supports 100Mbps only) *1 DC-In Jack *1 Full size SD only *1 Kensington Lock (7.
Appendix SW OS Support multi-language Driver and user’s manual in HDD image Application System CPU/SoC Speed Cores Graphic Memory Storage WLAN/Bluetooth Environment Temperature & Humidity Altitude Accessories Android 4.2.1 JellyBean Y Y Google GMS and VSC consigned nVidia Tegra® 33 1.7GHz Quad-core Embedded DDR3 1GB, Speed to 800Mbps eMMC (NAND), 8G 801.11b/g/n, Bluetooth Operation: 20%~90% @ 35oC Non-condensing Storage: 20%~95% R.H.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-3757 service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty ViewSonic® Smart Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
Manufacturer’s Declaration of Conformity The ViewSonic brand Product VS15197 (Model name: VSD241) has been designed and manufactured in accordance with the Directive 1999/5/EC of European Parliament and the Council on Radio equipment and Telecommunication Terminal equipment. The product is in conformity with the following standards and/or other normative documents: 1.
3. SPECTRUM Standard Title EN301489-1 V1.8.1 Electromagnetic compatibility and Radio EN301489-17 spectrum Matters (ERM); Electromagnetic V2.1.1 Compatibility (EMC) standard for radio equipment and services. Part 1: Common technical requirements. Part 17: Specific conditions for Wideband data and HIPERLAN equipment. Part 24: Specific conditions for IMT-2000 CDMA Direct Spread(UTRA) for Mobile and portable(UE) radio and ancillary equipment.
3. ErP Directive : 2009/125/EC Standard (EC) 1275/2008 (EC) 278/2009 Title Eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment Eco-design requirements for no-load condition electric power consumption and average active efficiency of external power suppliers Testing Body Quanta Computer Report No. N/A Delta Electronics Inc.
53
