User's Manual

Rev.1.0 Page 117 of 151 VW40-153-006
VIVIX-S 1717N User Manual
 If the remaining of battery is under 30% or at the 1
st
level, the detector LED for noticing
battey remains changes from green to orange color.
 The warning information related to battery remains is displayed from VXvue.
 The warning information related to battery remains is noticed from VIVIX SDK.
 If the remaining of battery is under 10%, the detector LED for noticing battey remains
blinks in orange color.
 If the remaining of battery is under 30% or at the 1
st
level, the system warns low battery
and the detector will be turned off automatically if the battery is being consumed for a
specific period of time. Therefore, it is recommended to change the battery when a
warning message or indicator is displayed.
7.1.3 Wireless Communication Diagnosis
 In case of using the detector with wireless communication way, make sure to check the
status of wireless communication before starting to use. If the status of wireless
communication is bad, the speed of acquiring images will be very slow or failed to acquire
images. Try to check the surrounding wireless communication status not to occur
communication interference. If wireless communication module in the detector has
problems, consult the sales representative in Vieworks or a relevant engineer.
Check the Connection Status

Check the wireless communication state from the Information tab of the Diagnosis dialogue in VIVIX
Setup program.

User can check the connection status of wired or wireless detector through VXvue or VIVIX SDK.
Item
Description
Connection Type
Indicates the connection mode. (Wireless / Tether)
Link Speed
Connection status in the wired mode. (1000Mbps / 100Mbps)
Link Quality
Link Quality (Status of the connection quality) value
Signal-level
Singal strength
Bit rate
Transmission / reception speed