User's Manual

Rev.1.0 Page 90 of 151 VW40-153-006
VIVIX-S 1717N User Manual
5.3.2 Detector Power Save Function
The consumption of a battery pack can be reduced by using the power save function.
 The power save function is operated only when the battery supplies power to the
detector. In other words, the power save function cannot be operated if a tether interface
cable supplies power to the detector.
Mode
Mode
Meaning
Normal
The detector can be operated and take an image at any time.
Sleep
The detector cannot be operated. User can take an image by disabling the Sleep mode.
Shut Down
The detector has been turned off. User can take an image after the detector is rebooted.
Setting Items of Power Save Function
Mode
Meaning
Normal
-
Sleep
Selects the function On (use) or Off (not use).
Sleep after (min.)
Sleep mode is activated if the detector is used during the setting time. (10 / 15 /
20 / 25 / 30 min.)
Shut Down
Selects the function On (use) or Off (not use).
Shutdown after (min.)
The detector is turned off if it is not used during the setting time. This menu is
activated while the Shut Down function is used. (30 / 60 / 90 / 120 min.)
Entry Condition of Power Save Mode
Mode
Meaning
Normal
-
Sleep
The detector turns to sleep mode if not used for the setting time (Sleep after).
Shut Down
The detector is turned off if not used for the setting time (Shutdown after) under the
sleep mode. However, if the detector is not used for the setting time (Shutdown after)
under the sleep off state, the detector is turned off.
Checks Power Save Mode
Mode
Meaning
Normal
All LED lamps are turned on.
Sleep
Power LED (Green) is blinking.
VXvue (Vieworks Viewer) indicates the state of sleep mode.
VIVIX SDK indicates the state of sleep mode.
Shut Down
All LED lamps are turned off.