User's Manual

Rev.1.0 Page 26 of 151 VW40-153-006
VIVIX-S 1717N User Manual
2.3 VIVIX-S 1717N Detector
VIVIX-S 1717N is designed to acquire digital images by collecting x-ray signals and sereval conversion
processes. You can use the acquired image (17” x 17” film size) diversely depending on the purpose of use.
 VIVIX-S 1717N is one of the VIVIX detector models produced by Vieworks.
2.3.1 Specifications
Item
Specifications
Model
 FXRD-1717NA (CsI)
 FXRD-1717NAW (CsI)
 FXRD-1717NB (Gadox)
 FXRD-1717NBW (Gadox)
Image Sensor
 TFT: a-Si (Amorphous Silicon)
X-ray Scintillator Type
 FXRD-1717NA(W) : Csl: TI (Thallium doped Caesuim Iodide)
 FXRD-1717NB(W) : Gd2O2S:Tb (Gadolinium oxysulfide)
Pixel Pitch
 0.14㎜ (140㎛)
Field of View
 17” x 17”
Active Area (H x V)
 430.08㎜ × 430.08㎜
Active Array
 3072 x 3072 pixels
Effective Area
 428.4㎜ x 428.4㎜
Effective Array
 3060 x 3060 Pixels
Grayscale
 16 bit
Spatial Resolution
 Min. 3.5 lp/㎜
Image Acquisition Time (Wired)
 1.5 sec.
Image Acquisition Time (Wireless)
 3 sec.
Recommended Cycle Time
 15 sec.
X-ray Synchronization Control
 AED (Auto Exposure Detection)
 DR Trigger (External line trigger)
Rated Power Supply
 DC +24V, Max. 1.0A
 Wired: Powered by SCU with a tether interface cable.
 Wireless: Powered by a battery pack (3,100 ㎃ h X 2)
Power Consumption
 Max. 24W
Dimensions (H × W × D)
 460㎜ × 460㎜ × 15.5㎜
Weight
 4.2kg (Wired)
 4.5kg (Wireless / including a battery pack)
Image Transfer
 Wired: Gigabit Ethernet (1000BASE-T) via PoE (Power over
Ethernet)
 Wireless: IEEE802.11n
Data Transmission Rate (Wired)
 Max. 1Gbps
Data Transmission Rate (Wireless)
 Max. 300Mbps (MIMO 2X2)