User's Manual
Table Of Contents
- Instruction
- Product
- System Configuration
- Installation
- Setting
- Calibration
- Diagnosis, Inspection and Maintenance
- Troubleshooting
- Regulatory Information
- Medical Equipment Safety Standards
- Radio Frequency Compliance Information
- Labels and Symbols
- Guidance and Manufacturer’s Declaration for EMC
- Electromagnetic Emissions
- Electromagnetic Immunity
- Electrostatic Discharge (ESD) IEC 61000-4-2
- Electrical Fast Transient/Burst IEC 61000-4-4
- Surge IEC 61000-4-5
- Voltage Dips, Short Interruptions/Voltage Variations on Power Supply Input Lines IEC 61000-4-11
- Power Frequency (50/60 ㎐) Magnetic Field IEC 61000-4-8
- Conducted RF IEC 61000-4-6 / Radiated RF IEC 61000-4-3
- Information
Rev.1.0
Page 72 of 151 VW40-152-009
VIVIX-S 1012N User Manual
Summary list of the Detector AP LED
Information
Detector
AP LED
Detector
AP OFF (Communication status: Good)
Wireelss communication: 3
rd
level or higher
Wired communication: 1000Mbps
ON
Detector
AP OFF (Communication status: Normal)
Wireelss communication: Under 2
nd
level
Wired communication: 100Mbps
ON
Detector
AP ON
ON
Switching the status of detector
AP
Blink
The wireless setting is being synchronized
Blink
Power
OFF
OFF
If the LED blinks abnormally, refer to <8 Troubleshooting> to check if communication or
system error is occurred.