User's Manual

Rev.1.0 Page 26 of 151 VW40-152-009
VIVIX-S 1012N User Manual
2.3 VIVIX-S 1012N Detector
VIVIX-S 1012N is designed to acquire digital images by collecting x-ray signals and sereval conversion
processes. You can use the acquired image (10” x 12” film size) diversely depending on the purpose of use.
 VIVIX-S 1012N is one of the VIVIX detector models produced by Vieworks.
2.3.1 Specifications
Item
Specifications
Model

FXRD-1012NA (CsI)

FXRD-1012NAW (CsI)

FXRD-1012NB (Gadox)

FXRD-1012NBW (Gadox)
Image
Sensor

TFT: a-Si (Amorphous Silicon)
X
-ray Scintillator Type

FXRD-1012NA(W) : Csl: TI (Thallium doped Caesuim Iodide)

FXRD-1012NB(W) : Gd2O2S:Tb (Gadolinium oxysulfide)
Pixel
Pitch

0.124㎜ (124㎛)
Field of
View

10” x 12”
Active
Area (H x V)

253.95㎜ × 317.44㎜
Active
Array

2048 x 2560 pixels
Effective
Area

252.5㎜ x 316.0㎜
Effective
Array

2036 x 2548
Grayscale

16bit
Spatial
Resolution

Min. 4.0 lp/㎜
Image
Acquisition Time (Wired)

1.5 sec.
Image
Acquisition Time (Wireless)

3 sec.
Recommended Cycle Time

15 sec.
X
-ray Synchronization Control

AED (Auto Exposure Detection)

DR Trigger (External line trigger)
Rated
Power Supply

DC +24V, Max. 0.8A
 Wired: Powered by SCU with a tether interface cable.
 Wireless: Powered by a battery pack (3,100 ㎃ h)
Power
Consumption

Max. 19.2 W
Dimensions
(H × W × D)

287.0㎜ × 350.0㎜ × 15.0㎜
Weight
(including a battery pack)

2.2 kg
Image
Transfer

Wired: Gigabit Ethernet (1000BASE-T) via PoE (Power over
Ethernet)

Wireless: IEEE802.11n
Data
Transmission Rate (Wired)

Max. 1Gbps
Data
Transmission Rate (Wireless)

Max. 300Mbps (MIMO 2X2)