User's Manual

6 | Installing and Setup
2.5.2 About pen pressure sensitive
The pen support 1024 levels pressure. To draw with pressure,
select a pressure-sensitive tool from your application’s tool palette,
when you press your pen tip lightly, it will show softer color or
thin lines, and press harder for dense color or thick lines.
Notes:
1) Hold this pen the way you would hold a normal pen or pencil
while writing on paper and the allowed pen input angle is 45°
in any direction from a position.
2) The interactive pen has an automatic power off function, if
operating paused and over 20 minutes, click pen tip recall
active status. If pen no function, please check a battery be
inserted.
2.6 DisplayLink Manager
When this DisplayLink device installed, you can find an icon of
DisplayLink Manager ( ) on the system tray, click it for setup.
2.6.1 DisplayLink on Windows XP
Click DisplayLink icon ( ), open DisplayLink Manager menu
and provide setup below.
1) Extend: 4 modes for option (Right/Left/Above/Below), the
default setting is “Extend to Right”.
2) Main Monitor: set as main monitor, except Notebook PC.
3) Notebook Monitor Off: attached monitor display only.
4) Mirror: a duplicate display mode, it will change to a same
resolution of both of main and duplicate monitors.
5) Off: turn off extend monitor.
6) Advanced: open the Display Properties setup window.
7) Check for updates: DisplayLink driver update.
Notes：Once a setup above is completed, please execute the screen
calibrating program for USB Tablet monitor (refer to section 2.4).