Operating instructions

SETTING UP
Step-By-Step Installation
1. Turn off your VCR and TV.
2. Adjust switch settings:
• Channel switches on the back of VCR and the View-Master®
Interactive Vision ™ Television /stem (VMN) should both be
set to 3 or 4.
• The 1V should be tuned to the same channel (either 3 or 4).
3. Connect the Electronic Controller Unit.
Take the black cable attached to the front of
the VMN Video Processor, and attach it to
the Electronic Controller Unit with its
joystick and buttons. A small rib has been
added to make sure the plug fits only in one
position. Align the plug carefully.
8