User`s guide

i-Pro Viewer
i
-
PRO
Viewer User’s Guide
11/
23
Viewing Cameras
i-Pro Viewer can present the video from 1 to 16 cameras on a display at one time. The Channel
Selection and Viewing Option controls are described below. Notice that
the 16 viewing locations in i-Pro
Viewer are labeled “CH1” through
“CH16”. Clicking on one of the
Channel Selection buttons will
select the camera to be controlled.
The user can also click on the viewing location directly to
select a camera as well.
The Viewing Option Controls are used to display 1, 4, 9 or 16 cameras at a time. The 4 buttons
that control the number of cameras
to be displayed at one time are
outlined in the enlargement of the
Viewing Option Controls at the right.
The Viewing Option Controls can
also be used to go to a full screen
view (without any control buttons
visible). Clicking on the button outlined at the right will cause the current
view to become a full screen view without the I-Pro Viewer frame or
controls. A right click on the mouse or pressing the “ESC” key will return
to the previous view. The “Left Arrow” button on the Viewing Option
Controls is used to move to the previous video display and the “Right arrow” is used to move to the
next video display. The center button (outlined to the right) on the bottom
row of the Viewing Option Controls can be used to rotate through a
sequence of camera views.
The rotation sequence depends on the 1, 4, 9 or 16 camera view as shown
below.
The scan interval, as
described in the Initial
Setup section, can be set
from 1 to 20 seconds.