User guide

Chapter 3, Ipro eCapture Queue Manager
3-14 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
Click . The Settings Applied prompt appears indicating
that the settings must be accepted by clicking OK before they take
effect. Otherwise, the values may
Click OK.
Click OK to close the Queue Manager Configuration dialog.
Modifying the Ipro eCapture Queue
Manager Configuration Settings
1. Right-click the Queue Manager icon in the system tray to display the
context menu.
2. Choose Configure. The Queue Manager Configuration dialog appears.
3. Please see the section, Configuring the Ipro eCapture Queue Manager on
page 3-2 and proceed from step 3.
Testing the Connection
Test the connection whenever necessary. Please see the section, Configuring
the Ipro eCapture Queue Manager on page 3-2 and step 5 to test the connec-
tion.
Starting and Stopping the Ipro eCapture Queue
Manager
If the Queue Manager is stopped, tasks that have already been assigned to
workers will complete; but, it is likely that queued jobs will not.
See the section, Exiting the Ipro eCapture Queue Manager on page 3-16 for
information on exiting.
Right-click the Queue Manager icon (a computer monitor with base) in the
system tray to display the context menu and choose Stop.