User guide

Chapter 2, Ipro eCapture Controller
2-60 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
Error Handling
Errors are logged to a file called CONTROLLER.LOG. When an error occurs, the
Show Log File icon will change to a Warning icon. When the warning
icon is clicked, Notepad opens and displays the error(s) and the Warning Icon
changes back to the Show Log File icon. Whenever an error is encountered,
the Warning Icon will display in the Ipro eCapture Controller toolbar. This file
records all job status changes and any timeouts or errors reported during the
job start sequence or during the job queue refresh. It also records starting of
the deletion agent.
Setting the Processing Update Intervals
To control how frequently the processing status updates, select an Interval
Value from the drop-down list in the Ipro eCapture Toolbar. Interval Values
are Off, 5, 10, 15, 20, 25, and 30 seconds as well as 1, 2, 5, 10, and 30 min-
utes.
Select OFF from the drop-down list to prevent updating.
Applying Rules Set in the Flex Processor Rules
Manager
Rules can be applied two ways: directly from within the Flex Processor Rules
Manager via the Preview Results function or using the Apply Rules function in
the Controller toolbar. The Apply Rules function is used to select multiple jobs
and simultaneously run those jobs while applying their respective rules. The
Job’s priority is automatically set to the highest so the rule application tasks
are distributed and worked on first.
Turning the interval OFF will prohibit Job start and Job completion
routines to complete.