User guide

Removing Information from Images
www.iprotech.com Ipro eCapture User Guide D-15
877-324-4776 Q1 2014
Format:
IO,[Image Key],[Information Field Number],[leave information empty]
IO is the identifier that tells the system this is an information field import pro-
cess.
[Image Key] is the image key from which the information field data is to be
deleted.
[Information Field Number] is the field number assigned to the information.
Valid information field numbers are 1, 2, 3, 4, 5, 6, 7, 8, 9, and 10. You can
use a single file to load multiple fields into the same image key. You must have
a separate record for each information field number.
[Information] is blank. Because the IO command overwrites any existing data
for the field, overwriting any existing data with nothing essentially deletes the
previous contents of the IO field.
Be sure to supply the comma after the IO field number.
Example:
IO,ALG-1-000001,2,
Removing All Tags from a Page (DT)
This command removes all issues/tags from an image.
Format:
DT,[Image Key]
Example:
DT,ALG-007
This example removes all tags from ALG-007.
Removing a Tag from a Page (RT)
This command removes an issue/tag from an image.
Format:
RT,[Image Key],[Issue Name]
RT is the identifier that tells the system to remove an issue record from an
image.