User guide

Appendix D, LFP Files
D-14 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
Including OCR Text in the LFP File (OI)
An option in Ipro OCR, Include Original OCR Text in Ipro LFP File, will automat-
ically include the OCR text in the LFP file when it generates the Word List LFP
file during OCR processing. For every image OCRed, the LFP file will contain
the LFP command OI, followed by the Image Key, and then the OCR text for
that image. This command and its data will follow the FT command and its
data for each image in the LFP file.
An option in Ipro Build, Include OCR Text in LFP File, will generate an .LFP file
that contains the LFP command OI, followed by the Image Key, and then the
OCR text for that image.
Format:
OI,[Image Key] The image’s OCR text immediately follows.
OI is the identifier that tells the system to include the OCR Text
[Image Key] is the image key from which the OCR text was generated
The image’s OCR text is the actual OCR text from the image. Two empty boxes
will appear at the end of the OCR text to indicate a line return feed.
Example:
OI,ALG-01-011,the chromium levels were especially high in the east well
OI,ALG-01-011,<< ALG-01-011 >>, the chromium levels were espe-
cially high in the east well
This example shows the image key enclosed in << >> which signifies that the
option to include the image key was selected during the OCR process. It is
OCR text.
Removing Information from Images
Removing Data from Information Only Fields
(IO)
You can remove data from information only fields that you have previously
populated either in scanning or with an IO or IA LFP file command. To do this,
simply load an LFP file with the IO command, and do not provide any informa-
tion after the field number.