User guide

Appendix D, LFP Files
D-8 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
This example groups 99 images into a single folder. Any images in the range
ALG-002 through ALG-099 that are set to Document and Child will retain their
boundary settings. If ALG-100 is not already set to Folder or higher, it will be
set to Folder in order to prevent it from being unintentionally grouped with the
image range specified in this BR command.
Assigning Level Codes (LC)
This command is used for tracking physical binding elements of a scanned col-
lection. Binding elements include paper clips, rubber bands, staples, etc. This
information is usually applied during scanning with Ipro Premium Scan, but
can be applied later.
Format:
LC,[Image Key],[Level Code String (40 char max)]
LC is the identifier that identifies the file as a level code record.
[Image Key] is the image key to which the information field is to be applied.
[Level Code String] is a binding element
The Level Code String field cannot contain any embedded commas.
Example:
LC,A0010007,1:MF;2:BC;3:ST
Adding Information to Images
These commands add information to images, such as info only fields or issue
tags.
Loading Information Only Field Data (IO)
After you define the Info Only field labels in the project setup, and load the
images, you can load the Info Only field data. To do this, you create an LFP file
that lists the image key, the information only field, and its data. The data in
each field must not exceed 80 characters.
Format:
IO,[Image Key],[Information Field Number],[Information]