User guide

Changing Boundaries
www.iprotech.com Ipro eCapture User Guide D-7
877-324-4776 Q1 2014
BM,ALG-010,
This example turns ALG-010 into a page in a document.
Grouping a Range of Images (BR)
This command can be used to group a range of images together. For example,
you can group 100 images into a single folder while retaining their document
and child settings. Because the syntax of the BR command includes an image
key begin/end range, you can easily modify an ASCII file of begin/end ranges
and use the BR command to set document breaks.
The first image key you specify in the BR command will receive the boundary
you specify in the command.
If the beginning image key has a higher boundary flag than the one you supply
in the BR command, the existing boundary setting is retained.
All subsequent images in the range will retain their boundary settings unless
their current settings are higher than the boundary you are applying. In other
words, if you are grouping images into a folder, all documents and children in
the range will retain their document/child boundary settings.
Any images in the range that are originally marked with a boundary higher
than the one you are supplying in this LFP command will become pages.
If necessary, the boundary of the first image following the range will be
changed so it will continue to be separate from the image range whose bound-
ary you are changing.
The boundary flag specified in this record must match one of the boundary
flags defined in the project’s setup.
This record format is the same for both an Ipro Tech internal image (.IMG) and
a standard single image file.
Format:
BR,[Begin Image Key],[End Image Key],[Boundary Flag]
Example:
BR,ALG-001,ALG-099,F