User guide

Appendix A, Using the Flex Processor Rules Manager
A-20 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
: Click to move a selected field from the Available Fields box to
the Selected Fields box.
: Click to move a selected field from the Selected Fields box to
the Available Fields box.
: Opens the Insert Custom Field dialog where you
can create new group fields and new user fields. Inserting Custom Group
Fields is discussed in Chapter 7, Creating Export Series and Export Jobs
in the section, Inserting Custom Group Fields on page 7-27.
and : Use these arrows to change the order of the fields in the
Selected Fields box. Select a field (or contiguous fields) and then use
either arrow to reposition it (or the selected fields) accordingly.
4. Select a field in the Selected Fields box. The selected field appears in the
Font section. Click to open the Font dialog. Select from the Font
options and click OK to return to the Custom Placeholder Configuration
dialog. Repeat for each additional field.
5. Select from the following options:
Field Options
Include labels with values: When selected both the field label and its
value are included.
Placement Options
Select from the following metadata field placement options.
Alignment
• Vertical Alignment: Determines placement along the vertical
axis. Options include Top, Center, or Bottom. Top is the default.
• Horizontal Alignment: Determines placement along the horizon-
tal axis. Options include Left, Center, or Right. Left is the default.
Indentation: Indicate space for the Left and Right. This setting deter-
mines the horizontal spacing to the left or right of the page margins.