User guide

About Export Series
www.iprotech.com Ipro eCapture User Guide 7-269
877-324-4776 Q1 2014
Do one of the following:
• Click Yes to reset/rollback the volume and image key number informa-
tion for the Series. For example, if there were three Jobs and the last
started Job was the third job with the Volume number of VOL003 and an
ending image key number of EXH-0000254, then the next Job for the
series would be VOL003 with a starting image key number of EXH-
0000255
• Click No. The next Job’s volume and image key number will not be reset.
It will continue with the next Volume and image key number from the
deleted Job.
• Click Cancel
To delete an Export Series, select the Series in the Tree View, click the alter-
nate mouse button, and choose Delete Export Series.
Export Series cannot be deleted or edited in the Limited Controller.
Creating an Export Job from an Existing Export
Series
When you select the Export Series (under Process Export or Data Extract
Exports) in the Tree View, click the alternate mouse button, and choose either:
• Create New Process Export Job in Series or
• Create New Data Extract Export Job in Series
from the context menu, the New Export dialog appears with that Export Series’
name already appearing in the Export Series drop-down list.
From this point, you may proceed with selecting the Job(s) and continue
through the dialogs.