User guide

Chapter 7, Creating Export Series and Export Jobs
7-256 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
overwrite files. Click Yes to overwrite or No to return and select a differ-
ent directory.) Click OK. The directory is accessed and displays the sam-
ple files (CONCORD.DAT and OPTICON.OPT).
17. Under Relativity Settings File:
• click for Field Map (.KWE) and browse to the .KWE file. Click
Open.
If this is for a Data Extract Export Job, it will appear in the Ipro eCapture Con-
troller’s Job Queue. Start the Data Extract Export job. The job’s details are
available by selecting the job in the Tree View. (Under Export Jobs, Data
Extract Exports). The Information Panel has three buttons: View Settings,
View Output, and View Report. Click View Settings to display information
about the job. Click View Output to access the files that were created via the
Explorer. Click View Report to view the Export Summary Report.
If this is for an Export Series, the Series name will appear in the Client Man-
agement tree view under Data Extract Exports; located under Export Jobs. The
Export Series will then be available for selection when creating a Data Extract
Export job.
Click to conclude the autoloading into Relativity. The job appears in
the Job Queue and the Progress column shows Autoload Initiated. The job also
appears under Data Extract Exports in the Client Management tree view with
the Relativity icon.
Export Formats
This section provides specific information for exporting to these formats:
• Concordance® DAT
•Summation Case
• OCR CONTROL.LST file
•Ringtail
•Ipro DLF (Eclipse)
Export to Concordance® DAT
Select Opticon & TotalVZN (OPT File) under Image Load Formats.