User guide

Chapter 7, Creating Export Series and Export Jobs
7-250 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
As you populate the Image Key fields, the number displayed in parenthesis,
directly to the right of the Field label, will decrement accordingly. The Sample
Image Key field is used to check the Image Key as entered. You may change
the Image Key as often as necessary BEFORE you click Finish to begin the
Export process.
When configuring the Image Key, keep in mind whether you will be exporting
out a single job or using the Export Series concept, which allows output of suc-
cessive unattended exports with sequential Image Key numbering and vol-
umes. The starting Image Key will automatically be set to the next available
number based on the previous export’s ending number in the given set.
Page: If you do not enter a value in this field, the system will assign a
starting Image Key of 000000001 or the next available Image Key. Oth-
erwise, you can enter a value, not to exceed 15 numeric only characters
(0-9).
Document: The Document portion of the image key number may have
a total of 15 numeric only characters (0-9).
Parent: The Parent portion of the image key number may have a total
of 15 numeric only characters (0-9).
Prefix: The Prefix portion of the image key number may have a total of
25 alphanumeric characters, dash [-], and/or underscore [_].
The Delimiters include: None, Underscore, Dash, Semi-colon, Period, or Space.
Each section of the image key number may be padded up to 15 digits.
See the section Using Rollover Numbering for Ringtail Format on page 7-177 if
the Ringtail format was selected for additional information about the Rollover
Numbering option.