User guide

Chapter 7, Creating Export Series and Export Jobs
7-8 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
10. Select from the following options:
a. Image Load Format and Data Load Formats - Select one or
more Formats from each box. (Note: To export and select from
the following Data Load Formats only - Delimited ASCII Text File,
Custom Export Format, Summation Text File, and Concordance
DAT - deselect both the Export Image Files and the Export Image
Text checkboxes.)
Resulting export screens will display options as they pertain to the
selected formats.
•Export to Concordance® DAT
•Export to Summation case
•Export to OCR CONTROL.LST
See the section, Export Formats on page 7-256 for additional
information about the options in the previous bullet list.
For Ringtail Format, see the section Ringtail Format on page 7-
259.
If the image load file format you need to create does not appear
under Image Load Formats, select Custom Export Format.
See the section, Custom Export Format (Image Load and/or Data
Load Format) on page 7-262 for specific information on populat-
ing the Select Custom Load Delimiters screen.
The Data Load Formats, LaserFiche, DB/Textworks, and OCR
Control.lst will not appear unless the option, Export Text Files, is
selected.
b. Export Image Files - When selected images and text files are
exported. Select one or more Load Formats and select from the
options described in c) and e).
If deselected, there will not be any Image Load formats available
for selection (skip c and e); however, Ringtail and Summation DII
are available for selection under Data Load Formats. In addition,
the option, Use page-based numbering, appears to the right
and is selected by default. When selected, page counts in image
key numbering are retained.