User guide

Chapter 6, Performing QC
6-76 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
• Create placeholder text - Document text is cleared and a text
file is created that matches the text on the placeholder image.
• Apply text - Enter text for the new document text file. If no text
is specified, the new document text file will be blank/empty.
5. Select Set as Session Default (current QC session only) to save the
settings to the current open QC application. The placeholder selections
will be available across all QC sessions.
6. Select Save settings as Machine Default (all QC sessions on this
machine) to save the settings to the QC.INI file so that new QC ses-
sions will automatically use the settings.
7. Click OK.
Viewing a Record’s metadata or Extracted
Text/OCR
Reviewing Extracted Text/OCR Data
Click the Extracted Text/OCR Tab above the image list. Each page will show
extracted text.
Reviewing metadata
Click the metadata Tab above the Documents/Records List window. Ipro
eCapture QC supplies all document metadata gleaned during processing.
You cannot edit the metadata.
ProcessStatus field is included and shows a field value of either Failure or Suc-
cess.