User guide

Working with the Image View Area
www.iprotech.com Ipro eCapture User Guide 6-43
877-324-4776 Q1 2014
9. Click OK. The Success dialog appears indicating the ID number for the
saved Placeholder.
10. Click OK. The Custom Placeholder Configuration dialog closes.
Saving Custom Placeholder Definitions
See Appendix A - Using the Flex Processor Rules Manager and the section Sav-
ing Custom Placeholder Definitions on page A-24.
Loading Saved Custom Placeholder Definitions
See Appendix A - Using the Flex Processor Rules Manager and the section
Loading Saved Custom Placeholder Definitions on page A-25.
Deleting Stored Placeholder Definitions
See Appendix A - Using the Flex Processor Rules Manager and the section
Deleting Stored Placeholder Definitions on page A-25.
Working with the Image View Area
There are three tabs you may select from in the Image View area: Image,
Thumbnails, and View.
Image Tab Window
The Image Tab window shows the output from the file processing. The toolbar
icons are described in the following table:
Click To:
Fit the image normally; scroll bars may appear.
Fit the image horizontally in the Image Window. If the Image
Window is widened, then a scroll bar will appear on the right
side of the image so you can scroll up or down to view the top
or bottom of the image.