User guide

Chapter 6, Performing QC
6-26 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
Image Traversal - Set the portion of images to be displayed during auto-QC:
• Every Page - Use this setting to do 100% QC, or display every page
during auto-QC.
• Every nth Page - Use this setting and enter a number. For example,
enter 2 to display every other page.
• First Page - Use this setting to have auto-QC display the first page of
each document without displaying any additional pages in the docu-
ments.
• Time Between Pages - Set the number of milliseconds the program
should display each image. 100 ms is a tenth of a second; 10000 ms is
10 seconds.
• Mark Documents as “Passed QC” - When selected, the “Passed QC”
flag is automatically applied.
Image Quality
• Auto-QC with Low Quality Images - Deselect this setting to get the
best possible image quality, which can slow down the auto-scroll QC pro-
cess.
Identical File Handling
Select the option, Apply output changes to all identical documents not
passed QC, to automatically apply any reprocessing changes for a given doc-
ument to all documents with the same MD5 hash value which have not passed
QC. This eliminates repetitive work by applying corrected output to any dupli-
cates.
Select a default scope from the Default Scope drop-down list. Options
include: Current Session, Job Level, Custodian Level, Project Level, and Client
Level. The selected scope is where the system will check for identical docu-
ments.
When a single item is selected, and either the (Reprocess Selected) or the
(Reprocess in Native Application) is clicked, the following conditions
occur:
• Reprocess should complete normally at first. Any errors will interrupt
workflow.