User guide

Chapter 2, Ipro eCapture Controller
2-6 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
9. Under Flex Processor Rule Application, adjust the Thread values for:
• Search Threads (Default value is 1, maximum value is 8):
Adjust this value to allow for how many dtSearch rules can run
simultaneously. A higher value will use more resources from the
Ipro eCapture Controller; however, it will allow multiple searches
to finish faster if the Controller machine has enough processor
capacity. Too many threads may not be handled well on slow or
heavily loaded machines.
• Rule Application Threads (Default value is 1, maximum
value is 8): Adjust this value to allow for how many non-dtSearch
rule applications can run at once (file type filters, item ID imports,
etc). These rule applications impact the SQL server rather than the
Ipro eCapture Controller, and in turn can impact how well Ipro
eCapture runs on the whole due to increased SQL activity while
rules are applied.
10. (Optional) For the NIST Database Settings, do the following:
•Enter the name of the NIST database. Note: The NIST database
is optional. It does not come with Ipro eCapture. For information
about NIST, visit http://www.nsrl.nist.gov. Please see the Ipro
NIST Loader Guide for information about installing and using the
optional NIST databases and the Ipro NIST Loader.
• Click . A dialog appears with connection status
information.
11. Click OK to close the System Options dialog. The Queue Manager Con-
figuration dialog appears. This dialog appears the first time the Ipro
eCapture Controller runs. By default the Queue Manager starts at the
same time as the Ipro eCapture Controller and it must be configured as
well.
12. See Chapter 3, Ipro eCapture Queue Manager and the section Configur-
ing the Ipro eCapture Queue Manager on page 3-2 for information on
populating the Queue Manager Configuration dialog.