User guide

Chapter 6, Performing QC
6-24 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
NOTE: If multiple people are QCing in a Terminal Services session, it
is necessary to select the Auto-Detect Printer Driver option since Ipro
eCapture installs up to 8 printer drivers. Therefore, there can only be a
maximum of 8 reprocess actions occurring on a machine, though the
number of viewers is [theoretically] unlimited.
Reprocess Timeout: Select a range between 30 and 3600 seconds (1
hour). 1800 seconds is the default timeout setting for normal reprocess-
ing.
Native Reprocess Timeout: Select a range between 30 and 86400
seconds. 86400 seconds is the default timeout setting for native repro-
cessing.
Max Page Threshold from Flex Processor: Uses the Max page value
set for the Flex Processor Rule. See Appendix A - Using the Flex Proces-
sor Rules Manager and the section Defining Actions for a Flex Processor
Rule on page A-15.
Max Page Threshold from QC Options: Uses the settings from the
Reprocessing Options, General Options screen. See the section Setting
the QC Reprocess Options for a Processing Job on page 6-77.
Setting the Auto-QC Options
While QCing documents for a Processing Job, you can use the auto-QC func-
tion to automatically scroll through a portion of the documents’ pages.