User guide

Adding Discovery, Data Extract, and/or Processing Jobs Simultaneously
www.iprotech.com Ipro eCapture User Guide 5-109
877-324-4776 Q1 2014
(Optional) Enter a Description for the Job.
(Optional) Enter a Batch ID.
5. (Optional) Click . The Add New Source dialog appears.
(Optional) Enter a Name for the Job. If a name is not entered, then the
Name box populates with the name of the selected folder at the end of
the selected Source Path.
From the Type drop-down menu, select Directory. (Note: See the sec-
tion Adding a Data Extract or Processing Job from an Item List on page
5-110 for procedures.)
Select the Directory to discover by clicking . Use the UNC path as
drive mappings may change over time.
Click OK to return to the Add Job dialog.
6. Repeat step 5 for each additional new source. Note: Once one or more
existing sources (discovered containers) are added to the Selected
Sources box, a new Source may not be added.
7. To add a container from the Source grid to the Selected Sources box
either double-click the container or select the container and click .
Repeat for each container. Note: Selected Sources cannot include both
an existing source container and a new source container. Existing con-
tainers may not be selected when an Item List is selected (appears in
the Selected Sources box). An Item List may not be combined with a
Directory when there is already a Directory source in the Selected
Sources box. An Item List may not be combined with another Item List