User guide

Chapter 5, Creating Clients, Projects, Custodians, and Jobs
5-46 Ipro eCapture User Guide www.iprotech.com
Q1 2014 877-324-4776
OCRed) and where [Errors] shows the number of those documents
that did not meet the specified average confidence level. Note: For
the purposes of calculating average document confidence, pages in
PDF docs with text behind them are considered 100%. OCR fail-
ures are considered 0%.
Click OK to close the Discovery Job Options dialog.
Start the job from the Job Queue pane by selecting its checkbox. Notice
that each line has a checkbox and a color circle beside the checkbox.
See Chapter 2, Ipro eCapture Controller, and the section Client Manage-
ment Tab on page 2-27 for information on controlling the jobs in the Job
Queue interface.
Importing Jobs at the Custodian Level
Multiple Discovery Jobs can be added to a Custodian at one time via an
imported .CSV or comma delimited file. Data Extract and/or Processing Job(s)
may be optionally created at the same time.
To import Discovery Jobs, the .CSV or comma delimited file should contain the
Container Path column header. Container Name is optional unless only Con-
tainer Paths are specified, then the Container Name is required.
There are several different scenarios for importing Jobs at the Custodian level:
• Importing Jobs with all columns specified in the import file: Job Name,
Container Name, and Container path. In this scenario, Jobs are created
while focus remains on the selected Custodian. The .CSV or comma
delimited file will contain the columns Job Name, Container Name, and
Container Path (required).
• Importing Jobs with just the Container Paths and Container Names spec-
ified in the import file. In this scenario, a Job name is required for each
selected Container. The Job name can be added to the .CSV or comma
delimited file, manually entered in the Import Preview dialog (shown in
the Figure in step 5) prior to importing, or left blank (name will be auto-
set).
• Importing Jobs with just the Container Paths specified in the import file.
In this scenario, a Job name and a Container Name is required for each
selected Container. The Job name and the Container Name can be added
to the .CSV or comma delimited file, manually entered in the Import Pre-