Specifications

Before calling for service, you can check the following items on
symptoms and solutions
No sound or distorted sound:
Ensure that the equipment is connected properly.
Ensure that the input settings for the TV and stereo system are proper.
No picture:
Ensure that the equipment is connected properly.
Ensure that the input setting for the TV is "video".
Ensure that the LCD is on.
No remote control:
Check the batteries are installed with the correct polarities(+&-).
The batteries are depleted: replace them with new ones.
Point the remote control unit at the remote control sensor and
operate.
Remove the obstacles between the remote control unit and the
remote control sensor.
Operate the remote control unit at a distance of not more than 8
meters from the remote control sensor.
No key operation(by the unit and/or the remote control) is effective:
Turn the unit off and then back to on. Alternatively, turn off the unit,
disconnect the AC power cord and the re-connect it.(The player may
not be operating properly due to lightning, static electricity or some
other external factor.)
Troubleshooting tips(Common)
Parameters and specifications
Item
Standard requirement
Output
Audio
:Speaker:1WX2,2X outputHeadphones
Input
Video
Audio
:2 channel : 2Vrms (1KHz 0dB)
Electronical parameters
VIDEO OUT
AUDIO OUT
:1.4 Vrms (1 KHz, 0 dB)
Power requirements
Power consumption
Dimensions (Approx.)
Weight (Approx.)
Operating humidity
: AC 100-240 V , 50/60 Hz
: 202(L)X192(W)X27.8MM
: <10W
: 1 kg
: 5 % to 90 %
System
Note: Design and specifications are subject to change prior notice.
N
Signal system
: PAL / NTSC
Frequency
response
Signal-to-noise ratio
:More than 80 dB (ANALOG OUT connectors only)
Dynamic range
:More than 85 dB
Accessories
:Remote control, AC adapter,
: 20Hz to 20 kHz(1dB)
Troubleshooting tips
12