Technical data

Check that the Power Switch on front of the amplifier is in the off position. Push
the plug (IEC line socket) of the power cable supplied with the amplifier into the
socket (AC INPUT) on back of the unit. Make sure it is pressed in firmly. Plug the
other end of the power cable into an AC wall outlet.
R
L
Speaker A
R
L
Speaker B
Speakers
Powered subwoofer
(Optional)
Slave amplifier
POWER
Turntable
DAB/FM Tuner
DVD Player
CD Player
VCR
POWER
HCD30B
Note: When you want to connect the 2
pairs of Speaker. A&B simultaneously,
the maximum impedance of speakers
must be 8 ohm or above.
USE ON LY WIT H 250V FUS E
HAM75 B
150W
FU SE :T 2A L 2 50 V
10
BACK PANEL CONNECTIONS
Back panel connections: