Specifications

9
You must connect a TV to the DVD system in order to use DVD player. You can connect other audio and audio / visual components
to the DVD system in order to use the Home Cinema Audio system’s surround sound capabilities.
Important!
- There are various ways to connect the system to a TV (as shown in the illustration). You only need to make one
of these connections.
- Always refer to the instruction manual of the connected equipment to make an optical connection
1 Use the audio cables to connect AUDIO OUT jacks to the corresponding AUDIO IN jacks on the TV or other audio/visual
components (supplied).
2 Use the Scart cable to connect SCART OUT jacks to the corresponding SCART VIDEO IN jack on a TV. (not supplied)
If your TV is not equipped with SCART video input jacks, you can select one of the following alternative connections:
Option 1
Connect the S-VIDEO OUT jack to the S-Video input jack on the TV using a S-Video cable. (not supplied).
Option 2
Connect the VIDEO OUT jack to the video input jack on the TV using a video cable (supplied).
Use the AUDIO OUT jacks
- For connecting to an amplifier, audio system or TV with analog audio inputs.
- For connecting to a CD or some type of recoder to make an analog recording.
Use the OPTICAL or COAXIAL jacks
- You can connect the OPTICAL or COAXIAL output to another amplifier with DTS, Dolby Digital decoder. (not supplied)
ConnectionsConnections
ConnectionsConnections
Connections
Connecting to TV and Additional Components
CO
A
X
I
A
LIN
AUDIO IN
AUDIO IN
OR
O
P
T
I
C
A
L
I
N
VIDEO IN
O
O
O
R
R
R
OR
S-VIDEO IN
SC AR T IN