ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 2 Contents Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions and General Warnings . . . . . . . . . . 3 Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating the Display Unit . . . . . . . . . . . . . . . . 4 Operating the Remote Control . . . . . . . . . . . . . 5 SmartView Swivel Mechanism . . . . . . . . . . . . . 6 Adjusting the Volume . . .
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 3 Safety Warnings 1. You must observe local regulations when installing the display. Do not install anywhere that would permit the monitor to be viewed by the driver. You must also ensure you do not block the safety protection equipment such as airbags. Ask a qualified professional to install this display. 2.
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 4 Precautions and General Warnings 1. Do not place any excess pressure on the screen when opening, closing or adjusting it. It should be operated gently and slowly so as not to damage the screen. 2. Ensure the screen is fully centered before closing it. Attempting the close the screen when it is at an angle will damage it. 3.
ctf72mc_in.
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 6 Operating the Remote Control 5 a PWR: Turns the unit ON and OFF (AUX1.
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 7 SmartView Swivel Mechanism 1. Turn on the power supply Gently press the remote control or Warning V 2. Gently press the "Open" button. The screen will automatically open 3. Manually adjust the screen position to your preferred angle 4. The screen can be extended to a maximum angle of 105º. Pushing it beyond this point could damage the device.
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 8 SmartView Swivel Mechanism 5. V Turning off the device Before turning off the device, centre the screen and continue to push upwards to turn off the device fully. Warning V V V 7 Make sure the screen has been centered before pushing upwards to turn off the device fully or the device could be damaged. Before pushing the screen upwards to turn off the device, do not turn the screen left or right as this could damage the device.
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 9 Adjusting the Volume Adjusting the Volume V. V. - V. - Gently press the Remote Control or press the "Vol +" button on the device to increase the volume Gently press the Remote Control or press the "Vol -" button on the device to lower the volume Note: Under normal circumstances, the "Vol +"and "Vol -" buttons are used to control the volume and not to adjust the menu.
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 10 Electrical Installation Wiring Diagram: 1. Connect AUX1, AUX2 input channels to multiple media sound capabilities, e.g. DVD changer, DVD player, GPS and Digital TV etc. 2. AUX3 Mini din input can allow easy connection to video and gaming facilities. 3. Yellow Lead: Plugged into a socket that receives 12 V directly from the battery. 4. Red Lead: Positive connection behind the ignition key 5. Black Lead: Earth connection (negative) 6.
ctf72mc_in.qxd 21/01/2005 13:11 PÆgina 11 Specifications Power Requirement: Power source: 12 V DC (from 10V 15.6 V) IR headphone transmitting device: Channel tuning frequency: 2.3MHz 2.
