Installation Manual
57
5350 485 GB 08/2007
Gas supply
Gas type conversion (only for operation with LPG)
1. Set the adjusting screw at the gas
train to “2”.
2. Switch On the system ON/OFF
3. Adjust the gas type in coding address
“82” (for a detailed description of the
individual steps, see Service
Instructions.
• Call up code 2 page 49
• In coding address “11” select
value “9”.
• In coding address “82” select
value “1” (operation with LPG)
• Set code “11” “9”
• Terminate code 2.
4. Open the gas shut-off valve.
A
Vitoden 200-W pages 44 - 4/9/07 7:56 pm Page 14