Technical data

Vitorond 100, VR1-22 to -33 Installation and Service

5583 571 - 01

Riello Burner Set-up

Burner Mounting

Refer to the Instructions supplied

with Riello burner

1. Remove burner from carton. The mounting flange

has been installed at the factory.

2. Mount four M8 spacer bolts A in threaded holes

of combustion chamber door.

3. Slide burner gasket B over spacer bolts.

4. Mount burner as shown. (For proper insertion lengths

see table on page 48).

5. Secure burner with M8 nuts C and washers D

provided.

Burner air tube insertion