Technical data

25
5583 571 - 01
Vitorond 100, VR1-22 to -33 Installation and Service
Beckett Burner Set-up
Burner Mounting
1. Remove burner from carton. The mounting flange
has been installed at the factory.
2. Mount four M8 spacer bolts A in threaded holes of
combustion chamber door.
3. Slide burner gasket B over spacer bolts.
4. Mount burner as shown. (For proper insertion
lengths see table on page 47).
5. Secure burner with M8 nuts C and washers D
provided.
Burner air tube insertion
Refer to instructions supplied with
the Beckett burner.