Technical data

Control Connections

Electrical Connections

Overview of electrical connections and plug-in connectors

Power supply connection of accessories

The power supply connection of accessories can be made directly at the control.

The connection is activated and deactivated with the system on/off switch.

The Vitotronic 200-H, HK1M mixing valve control, the mixing valve accessory kit

and the Solartrol control require a separate 120 VAC power supply from the wall

receptacle.

Cabling required for:

H outdoor temperature sensor

H Vitotronic 200-H, HK1M mixing valve

control

H accessory kit for heating circuit with

mixing valve

H remote switching of operating mode

H remote disable

H alarm output

H wall-mount base

H circulating pump

Note on connection of accessories

For details regarding other installation steps required, please reference the

Installation Instructions supplied with the respective accessory part.

Please note that only one accessory part or switch contact can be connected to

the contacts of a plug at a time.

Connecting the Power/Pump module

Installation Instructions

Power/Pump Module

The Vitodens 200-W WB2B boiler is

shipped with a Power/Pump Module,

which requires a 120 VAC power

supply from a wall receptacle. The

module contains a 120/230 VAC

step-up transformer for 230 VAC

operation.

Refer to the Installation Instructions

shipped with the module or those

contained in this manual for wiring

details (see page 52).

5369 297 v1.6