Installation Instructions

42
Checking gas equipment for tightness at operating pressure
Danger
Escaping gas leads to a risk of
explosion.
Check gas equipment for tight-
ness.
!
Please note
The use of leak detection spray
can result in incorrect functions.
Leak detection spray must not
reach electrical contacts or seal
diaphragm openings on the gas
valve.
Fitting the front panel
2x
1.
2.
1. Hook the front panel into place. 2. Tighten screws at the bottom.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5609 059 GB