Installation Instructions

38
4. Insert and secure new burner gauze
assembly
D
with new gasket
E
.
!
Please note
Tighten screws sufficiently
to prevent the components
being damaged and to ensure
they function correctly.
5.
Refit thermal insulation ring C.
!
Please note
Tighten screws sufficiently
to prevent the components
being damaged and to ensure
they function correctly.
6.
Fit electrode B.
!
Please note
Tighten screws sufficiently
to prevent the components
being damaged and to ensure
they function correctly.
Checking and adjusting electrode
8+2
4+0,5
1. Check the electrode for wear and
contamination.
2. Clean the electrode with a small
brush (not with a wire brush) or emery
paper.
3. Check the electrode gaps. If the gaps
are not as specified or the electrode
is damaged, replace and align the
electrode together with a new gasket.
Tighten electrode fixing screws.
!
Please note
Tighten screws sufficiently
to prevent the components
being damaged and to ensure
they function correctly.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5609 059 GB