Installation Instructions

23
For further information regarding the individual steps, see the page indicated
Commissioning steps
Inspection steps
Maintenance steps Page
1. Filling the heating system.............................................. 24
2. Venting the boiler by flushing....................................... 26
3. Changing to operation with LPG................................... 27
4. Checking the static and supply pressure..................... 28
5. Matching the burner output to the flue system........... 29
6. Reducing the max. heating output................................ 30
7. Matching the circulation pump to the heating system 32
8. Checking the CO
2
content.............................................
34
9. Burner removal .............................................................. 36
10. Checking the burner gasket and burner gauze
assembly......................................................................... 37
11. Checking and adjusting electrode................................ 38
12. Cleaning the heat exchanger......................................... 39
13. Checking the condensate drain and cleaning the
siphon.............................................................................. 39
14. Burner installation ......................................................... 40
15. Checking the diaphragm expansion vessel and
system pressure............................................................. 41
16. Checking all connections on the heating water side
and DHW side for leaks
17. Checking firm seating of electrical connections
18. Checking gas equipment for tightness at operating
pressure .......................................................................... 42
19. Fitting the front panel..................................................... 42
20. Instructing the system user........................................... 43
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
5609 059 GB
Service