Technical data

8
5608 490 v1.2
Vitocell 300-V Installation Instructions
53 and 79 USG (200 and 300 Liter) Tank Installation
Thermal insulation and thermometer installation
All required components are included in the insulation
jacket carton.
Note: the 53 and 79 USG (200 and 300 L) tank comes
with the insulation jacket installed.
1. Level the DHW tank with its leveling bolts.
2. Remove top cover and the thermal insulation blanket.
3. Insert the thermometer sensor into the tank cap hole
as far as it will go.
4. Secure the sensor with a spring clip. Install the top
cover and the thermal insulation blanket.
IMPORTANT
Do not extend the leveling bolts beyond an overall
length of 1½ in. (35 mm).
IMPORTANT
Never wrap insulating tape around the sensor.
Set-up and Connections