Technical Manual

Product Information
2 VITOCELL 300-B
Product Information
Domestic hot water storage tank of
high-grade stainless steel highly effective
all-around thermal insulation.
Fully hygienic, efficient and economical
domestic hot water production by solar
collectors and a hot water heating boiler.
Heat from the solar collectors is transferred
to the domestic hot water via the lower
tank coil.
Benefits at a glance:
H Corrosion-resistant tank of high-grade SA
240-316 Ti stainless steel offers a long
service life.
H Fully hygienic due to high quality
homogeneous stainless steel surfaces.
H The high-alloy material is immune to
cracking or peeling. The tank stays
hygienic and requires only minimum
service.
H Does not require a consumable anode for
corrosion protection.
H The entire water content is heated by a
1¼”/25 mm diameter stainless steel heat
exchanger surface which extends to the
bottom of the tank.
H Large heat exchanger surfaces allow fast
and even heating of the entire water
content, guaranteeing a high level of
domestic hot water comfort.
H Standby losses minimized by highly
effective HCFC-free insulation.
79 USG / 300 ltr version comes equipped
with hard PUR foam.
119 USG / 450 ltr version is supplied with
removable soft PET insulation for easier
handling.
H Two thermometers to show the DHW
temperature at the top of the tank, and at
the midpoint of the tank.
H Tank design is accepted in the State of
Massachusetts as being ASME equivalent.
H Certified to CSA Low Lead Content
Certification Program;
including US Safe Drinking Water Act,
NSF/ANSI 372 as well as other applicable
US State requirements.
5
1
6
7
4
1
5
-
0
1