Technical Manual

2
5470 954 v1.1
Vitocell 100-VH/-BH Technical Data
Vitocell 100
Product Information
Benefits at a glance:
Upright storage tank made of steel S235JR with one
or two large surface bare-tube heat exchangers.
Glass-lined (enameled) tank in accordance with
DIN 4753 part 3 on the inside, primer coated on
the outside.
Vitocell 100, NCVB-BH series for a dual-mode DHW
heating with solar panels in conjunction with a boiler.
Magnesium protection anode of 1a in. provided for
completion of the cathodic corrosion protection in
accordance with DIN 4753 part 6.
Temperature probe can be placed in variable positions
due to the use of sensor terminal blocks.
Nylon insulation jacket is dent-resistant.
Standby losses minimized by highly effective 2 in.
(50 mm) foamed-in-place CFC-free insulation.
Thermometer included.
Sensor tube included.
Fitted with 1b in. sleeve for re-fitting of an electric
heating inspection opening.
All external threads are flat sealing.
CFC free soft PU-foam insulation with a thickness
of 2 in. (50 mm) and a PVC coating.
Bottom insulation included, in accordance with
DIN 4753 Part 8.
Compressive strength 150 psi (10 bar).
Standard Equipment
79 USG (300 L) capacity Tank
DHW tank made from high-grade steel with fitted CFC free
soft PU-foam thermal insulation.
- 1 temperature and pressure relief valve
- thermometer °F/°C
Must be ordered separately:
- Electric heater
119 USG (450 L) capacity Tank
DHW tank made from high-grade steel with fitted CFC free
soft PU-foam thermal insulation.
- 1 temperature and pressure relief valve
- thermometer °F/°C
Must be ordered separately:
- Electric heater