Technical Manual

Product Information
2 VITOCELL 100-B
Product Information
Domestic hot water storage tank of corrosion
protected steel with built-in insulation made
of PUR Foam.
Fully hygienic, efficient and economical
domestic hot water production by solar
collectors and a hot water heating boiler.
Heat from the solar collectors is transferred
to the domestic hot water via the lower
tank coil.
Benefits at a glance:
H Corrosion-resistant tank with Ceraprotect
enamel coating ensures a long service life.
Additional cathode protection is provided
by a magnesium anode.
H The entire water content is heated by a
coiled 1”/25 mm diameter steel heat
exchanger surface which extends to the
bottom of the tank.
H Large heat exchanger surfaces allow fast
and even heating of the entire water
content, guaranteeing a high level of
domestic hot water comfort.
H Increased energy savings thanks to highly
effective, foamed-in-place HCFC-free
insulation keeping standby losses at a
minimum.
H Two thermometers to show the DHW
temperature at the top of the tank and at
the midpoint of the tank.
H The Vitocell-B 100 119 USG / 450 L
capacity tank is supplied with removable
soft PET insulation for easier handling.
H For dual-mode DHW heating with solar
panels in conjunction with a boiler. The
solar energy gathered by the solar panels
is transferred to the DHW by the lower
indirect coil. For mono-mode DHW heating
with a boiler or heat pump - both indirect
coils can be connected in series.
H Certified to CSA Low Lead Content
Certification Program;
including US Safe Drinking Water Act,
NSF/ANSI 372 as well as other applicable
US State requirements.
5
2
8
5
6
5
6
-
0
1