Technical data

5285 429 - 03

Vitorond 200, VD2 Series 320 to 1080 Installation

Enclosure

Boiler Control Installation

3. Install control harness bracket using supplied 8-32

self-tapping screws.

4. Install burner harness bracket and tighten the two

supplied screws.

5. Install top mounting hole cover with two supplied self

tapping screws.

1. Drill four Ø d in. (3 mm) holes on the side panels A

and B as shown. For left-side mount use a mirror

image of the drawing.

2. Punch a Ø

/8 in. (22 mm) opening.

Note: On VD2-500, -560, 630 and -1080 boilers,

the bracket mounting overlaps side panel B.